General Technical Specifications - Interacoustics affinity 2.0 Instructions For Use Manual

Affinity Instructions for Use - US

5 General Technical Specifications

Medical CE-mark:
Safety Standards
EMC Standard
Calibration
PC requirements:
Operative System:
Display:
Disc Space:
Compatible software
Input Specifications
Output Specifications
Affinity2.0 Hardware - Technical Specifications
The CE-mark indicates that Interacoustics A/S meets the requirements of Annex II of the
Medical Device Directive 93/42/EEC
Approval of the quality system is made by TÜV – identification no. 0123.
IEC 60601-1, UL60601-1, CAN/CSA-C22.2 No.60601-1
Class I, Applied parts type B, Continuous operation
IEC 60601-1-2
IEC 60645-1
Technical information is located in the specifications for the software modules.
Calibration information and instructions are located in the Service manual.
1.6 GHz Dual core CPU or better (Intel recommended)
1GB RAM or more. (Windows 8: 1GB 32-bit; 2GB 64-bit)
Hard drive with min 20 GB of free space.
Minimum display resolution of 1024x768 pixels (1280x1024 or higher recommended)
DirectX 9 graphics with WDDM 1.0 or higher. (Intel/Nvidia recommended)
One or more USB ports, version 1.1 or higher.
DVD-Rom drive.
Windows® 7, Windows® 8, Windows® 10
Minimum resolution of 1024x768 with hardware accelerated DirectX/Direct3D graphics card.
1GB RAM or more. (Windows 8: 1GB 32-bit; 2GB 64-bit)
Noah 3.7, Noah 4,, OtoAccess
Affinity
2.0 2.0
/ Equinox Suite
VSP, HLS, MHA (simulators)
Talk Back
Mic. 1/TF & Mic. 2
Pat. Resp. L & R
Inp. Aux. 1 & 2
TB Coupler
TB Coupler - internal TB
.0
(Affinity2.0 only)
Insitu L & R - Probe mic.
CD1 & CD2
TB Ref.
TB Ref – internal TB
.0
(Affinity2.0 only)
Insitu L & R - Ref. mic
Ref.Mic./Ext.
Coupler/Ext.
Wave files
FF1 / FF2
(Terminal Block)
TB Lsp.
FF1/ FF2
Sp 1, Sp 2, Sp 3, Sp 4
Left, Right
Ins. Left, Ins. Right
Bone
Ins. Mask.
HF/HLS
Insitu L, Insitu R
Monitor, Ass. Mon.
TM
and XML compatible
330µVrms at max. input gain for 0dB VU-reading
Input impedance : 47.5KΩ
Switches 3.3V to the logic input.
(The switch current is 33µA)
20mVrms at max. input gain for 0dB VU-reading
Input impedance : 15KΩ
10mVrms at max input gain for 0dB VU-reading
Input impedance : 10kΩ
7mVrms at max. input gain for 0dB VU-reading
Input impedance : 4,3KΩ
Not in use
Plays wave file from hard disk drive
Up to 12.6Vrms by 8 Ω load
70Hz-20kHz ±3dB
Up to 7Vrms by 600Ω load
70Hz-20kHz ±3dB
Up to 7.0Vrms by 10Ω load
70Hz-20kHz ±3dB
Max.3.5Vrms. by 8 Ω load
Page 53