Software Installation - Interacoustics affinity 2.0 Instructions For Use Manual

Affinity Instructions for Use - US

2.4 Software installation

To know before you Start Installation
You must have administrative rights to the computer on which you are installing the Affinity 2.0/ Equinox 2.0
Suite.
1. DO NOT connect the Affinity2.0 hardware to the computer before the software has been installed!
2. Interacoustics will not make any guarantee to the functionality of the system if any other software is
installed, with exception of the Interacoustics measurement (AC440/REM440) modules and
AuditBase system4, Otoaccess™, Noah3.7 or Noa4 compatible Office Systems or later releases.
What you will need:
1. Affinity2.0 Suite Installation DVD
2. USB Cable
3. Affinity2.0 Hardware
Supported Noah Office Systems
•
Noah 3.7 or Noah 4 (from HIMSA)
•
AuditBase System 4
•
Mirage
•
Practice Navigator
•
Power Office
•
AkuWin
•
He@r-O
•
Entendre 2
•
Quasar
To use the software in conjunction with a database (e.g. Noah3.7, Noah4 or OtoAccess
database is installed prior to the Affinity2.0 Suite installation. Follow the manufacturer's installation
instructions provided to install the relevant database.
Note that if you are using AuditBase System 4 you must ensure to launch this office system prior to this
installation of the Affinity2.0 Suite.
Installation on various Windows® versions
Installation on Windows® 7 (32 and 64 bit), Windows® 8 (32 and 64 bit) and Windows® 10 (32 and 64 bit)
systems are supported.
Note that with Windows® "N" versions, Media Player needs to be installed manually for the software suite to
run.
Software Installation on Windows® 7
Insert the installation DVD and follow the steps below to install the Affinity2.0 Suite software. If the
installation procedure does not start automatically, click "Start", then go to "My Computer" and double click
the DVD/CD-RW drive to view the contents of the installation DVD. Double click the "setup.exe" file to initiate
the installation.
Page 8
TM ), make sure the