Removing The Two-Piece Bezel - IBM x3200 4362 User Manual

Removing the two-piece bezel

When working with some devices, such as drives in bays 1 through 7, you must
first remove the two-piece bezel to access the devices.
Notes:
v Before you remove the upper bezel, you must unlock and remove the side cover
v If you are removing only the lower bezel, you do not have to remove the side
To remove the two-piece bezel, complete the following steps:
1. Unlock the side cover.
2. Remove the side cover (see "Removing the side cover" on page 21).Press the
3. Lift the lower bezel to disengage the two bottom tabs from the chassis. Set the
22
System x3200 Types 4362 and 4363: User's Guide
and remove the lower bezel.
cover. However, the side cover must be unlocked.
round blue release button on the right side of the lower bezel and tilt the lower
bezel forward to disengage it from the chassis.
lower bezel aside.