Using The Wizard For Basic Configuration - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

2.2 Using the Wizard for Basic Configuration

By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure below.
Operating the Setup Wizard:
1. The Setup Wizard can walk you through some important settings of the NVR. If you don't want to use the
2. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2. 4.
3. Enter the admin password. By default, the password is 12345.
4. To change the admin password, check the New Admin Password checkbox. Enter the new password and
5. Click the Next button to enter the date and time settings window, as shown in Figure 2. 5.
Downloaded from www.Manualslib.com
Figure 2. 3 Start Wizard Interface
Setup Wizard at that moment, click the Exit button. You can also choose to use the Setup Wizard next time
by leaving the "Start wizard when the device starts?" checkbox checked.
Figure 2. 4 Login Window
confirm the password in the given fields.
manuals search engine
27