Operations In Live View Mode; Using The Mouse In Live View - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
•
•
•
•
•
•
•

3.2.1 Using the Mouse in Live View

Downloaded from www.Manualslib.com
Single Screen: showing only one screen on the monitor.
Multi-screen: showing multiple screens on the monitor simultaneously.
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>General.
Start Recording: continuous record and motion detection record are supported.
Add IP Camera: the shortcut to add IP camera, manual and auto are selectable.
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
Playback: playback the recorded videos for current day.
Table 3. 2 Mouse Operation in Live View
Name Description
Menu Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the
Single Screen
dropdown list.
Multi-screen Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Previous Screen
Next Screen Switch to the next screen.
Start/Stop Auto-switch Enable/disable the auto-switch of the screens.
Start Recording Start continuous recording or motion detection recording of all channels.
Add IP Camera Add IP camera, manual mode and auto mode are selectable.
Enter the playback interface and start playing back the video of the
Playback
selected channel immediately.
Four modes of output supported, including Standard, Bright, Gentle and
Output Mode
Vivid.
The dwell time of the live view configuration must be set before using Start Auto-switch.
manuals search engine
44