Configuring Alarm Triggered Record - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

5.4 Configuring Alarm Triggered Record

Purpose:
Follow the procedure to configure alarm triggered recording.
Steps:
1. Enter the Alarm setting interface.
2. Click the Alarm Input tab.
Downloaded from www.Manualslib.com
This section is not supported by DS-7100N-SL and DS-7100NI-SL/W. For other models, the alarm input and
output are not provided by default. But when the connected IP camera has alarm input and output, the alarm
related record and playback are supported.
Menu> Configuration> Alarm
Figure 5. 14 Alarm Settings
Figure 5. 15 Alarm Settings- Alarm Input
1) Select Alarm Input number and configure alarm parameters.
2) Choose N.O (normally open) or N.C (normally closed) for alarm type.
3) Check the checkbox of Enable.
4) Click Settings.
manuals search engine
66