User Manual of Network Video Recorder
4. (For the encoders with multiple channels only) check the
2.3.2 Editing the Connected IP cameras and Configuring
Purpose:
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
setting of the IP cameras.
Steps:
1. Click the
Downloaded from
www.Manualslib.com
Figure 2. 17 IP Camera Management Interface
shown in the following figure, and click OK to finish adding.
Figure 2. 18 Selecting Multiple Channels
Customized Protocols
Editing the Connected IP Camera
icon to edit the parameters; you can edit the IP address, protocol and other parameters.
manuals search engine
checkbox
of Channel No. in the pop-up window, as
35