Customizing Patrols - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

4.1.3 Customizing Patrols

Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in Customizing Presets.
Steps:
1. Enter the PTZ Control interface.
2. Select patrol number in the drop-down list of patrol.
3. Select the
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
5. Click OK to save the key point to the patrol.
Downloaded from www.Manualslib.com
Menu>Camera>PTZ
under Patrol option box to add key points for the patrol.
Figure 4. 5
patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the
PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to the
next.
Figure 4. 6
Repeat the above steps to add more key points.
Click the icon to delete the corresponding key point, and click the trash icon
points.
manuals search engine
PTZ- Add Key Point
Key Point Configuration
53
to.delete all the key