Setting Sensor Alarms - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

8.2 Setting Sensor Alarms

Purpose:
Set parameters and handling action of an external sensor alarm.
Steps:
1. Enter Alarm Settings of System Configuration and select an alarm input.
2. Set up the handling action of the selected alarm input.
3. Select Trigger Channel tab and select one or more channels which will start to record or become full-screen
4. Select Arming Schedule tab to set the channel's arming schedule.
Downloaded from www.Manualslib.com
This section is not supported by DS-7100NI-SL and DS-7100NI-SL/W.
Menu> Configuration> Alarm
Select Alarm Input tab to enter Alarm Input Settings interface.
Figure 8. 4 Alarm Status Interface of System Configuration
Check the Enable checkbox and click
Figure 8. 5 Alarm Input Setup Interface
monitoring when an external alarm is input.
Choose one day of a week and Max. eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
manuals search engine
button to set up its alarm response actions.
105