Expansion Slots; Standby Power Led - DFI SD101 User Manual

Expansion Slots

Mini PCI Express
mSATA
PCI Express x4
Mini PCI Express Slot
The Mini PCIe socket is used to install a Mini PCIe card. Mini PCIe card is a small form factor
PCI card with the same signal protocol, electrical definitions, and configuration definitions as
the conventional PCI.
PCI Express x4 Slot
Install PCI Express cards such as network cards or other cards that comply to the PCI Express
specifications into the PCI Express x4 slot.
Chapter 2 Hardware Installation
Chapter 2

Standby Power LED

This LED will light red when the system is in the standby mode. It indicates that there is pow-
er on the system board. Power-off the PC and then unplug the power cord prior to installing
any devices. Failure to do so will cause severe damage to the motherboard and components.
24
Standby Power LED
www.dfi.com