Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DFI SD330
Summary of Contents for DFI SD330
- Page 1 SD330-H110 MicroATX Industrial Motherboard User’s Manual A40600626...
-
Page 2: Copyright
Copyright FCC and DOC Statement on Class B This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class B digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules. -
Page 3: Table Of Contents
Table of Contents Cooling Fan Connectors................23 Power Connectors ..................23 LVDS LCD Panel Connector ................. 24 Chassis Intrusion Connector ................ 25 Front Panel Connector ................25 Copyright ......................2 Standby Power LED ..................26 S/PDIF Connector ..................26 Trademarks SMBus Connector ..................27 ......................2 LPC Connector .................... -
Page 4: About This Manual
About this Manual Static Electricity Precautions An electronic file of this manual is included in the CD. To view the user’s manual in the CD, It is quite easy to inadvertently damage your PC, system board, components or devices even insert the CD into a CD-ROM drive. -
Page 5: About The Package
About the Package The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • One SD330-H110 motherboard • COM port cable • One Serial ATA data cable •... -
Page 6: Chapter 1 - Introduction
Chapter 1 - Introduction Specifications SYSTEM Processor 6th Generation Intel Core Processors, LGA 1151 Socket INTERNAL I/O Serial 1 x RS-232/422/485 (RS-232 w/ power) (2.54mm pitch) ® 4 x RS-232 (2.54mm pitch) Intel ® Core i7-6700, Quad Core, 8M Cache, 3.4GHz (4.0GHz), 65W Intel Core i7-6700TE, Quad Core, 8M Cache, 2.4GHz (3.4GHz), 35W... -
Page 7: Features
Features • Wake-On-LAN • Watchdog Timer This feature allows the network to remotely wake up a Soft Power Down (Soft-Off) PC. It is supported via the onboard LAN port or via a PCI LAN card that uses the PCI PME (Power Man- The Watchdog Timer function allows your application to regularly “clear”... - Page 8 • Power Failure Recovery When power returns after an AC power failure, you may choose to either power-on the system manually or let the system power-on automatically. • USB The system board supports the new USB 3.0. It is capable of running at a maximum transmis- sion speed of up to 5 Gbit/s (625 MB/s) and is faster than USB 2.0 (480 Mbit/s, or 60 MB/s) and USB 1.1 (12Mb/s).
-
Page 9: Chapter 2 - Hardware Installation
Two 288-pin DIMM up to 32GB LVDS LCD Panel R507 R505 LCD/Inverter Power System COM 2 COM 3 COM 4 COM 5 COM 6 • Dual Channel DDR4 1866/2133MHz Fan 2 Vertical USB 2.0 (Type A) Chapter 2 Hardware Installation www.dfi.com... -
Page 10: Installing The Dimm Module
DIMMs. Ejector tab Ejector tab Not all slots need to be populated. DIMMs of the same memory configuration Dual Channel are on different channels. 5. Note how the module is keyed to the socket. Notch Chapter 2 Hardware Installation www.dfi.com... -
Page 11: Cpu
8. The ejector tabs at the ends of the socket will automatically snap into the locked position to hold the module in place. Note: The system board used in the following illustrations may not resemble the actual board. These illustrations are for reference only. Chapter 2 Hardware Installation www.dfi.com... -
Page 12: Installing The Cpu
4. Unlock the socket by push- ing the load lever down, moving it sideways until it Protective cap is released from the reten- tion tab; then lift the load lever up. Load lever Retention tab Chapter 2 Hardware Installation www.dfi.com... - Page 13 Alignment key The CPU’s notch will at the same time fit into the socket’s alignment key. Alignment key Important: The CPU will fit in only one orientation and can easily be inserted without exerting any force. Chapter 2 Hardware Installation www.dfi.com...
-
Page 14: Installing The Fan And Heat Sink
4 mounting holes around the socket. CPU fan connector 3. Orient the heat sink such that the CPU fan’s cable is nearest the CPU fan con- nector. Chapter 2 Hardware Installation www.dfi.com... -
Page 15: Jumper Settings
3. Now plug the power cord and power-on the system. 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 6 7 8 9 6 7 8 9 6 7 8 9 RS485 RS232 RS422 Full Duplex Chapter 2 Hardware Installation www.dfi.com... -
Page 16: Com1/Com2 Rs232/Power Select
RS422 (Full Duplex) or RS485. The pin functions of Serial COM port 1 and port 2 will vary ac- or RS232 with power. The pin functions of Com 1 and COM 2 will vary according to JP9’s and cording to jumper setting. JP14’s setting respectively. Chapter 2 Hardware Installation www.dfi.com... -
Page 17: Auto Power-On Select
JP5 is used to select the method of powering on the system. If you want the system to power-on whenever AC power comes in, set JP5 pin 2 and pin 3 to On. If you want to use the power button, set pin 1 and pin 2 to On. Chapter 2 Hardware Installation www.dfi.com... -
Page 18: Rear Panel I/O Ports
Configure the wake-up function of PS/2 keyboard/mouse in the Advanced menu (“ACPI Con- figuration” submenu) of the BIOS. Refer to the chapter 3 for more information. Important: The +5V_standby power source of your power supply must support ≥720mA. Chapter 2 Hardware Installation www.dfi.com... -
Page 19: Com (Serial) Ports
Configure the serial COM ports in the Advanced menu (“SIO NUVOTON6106D” submenu) of Configure the display devices in the advanced menu (“Video Configuration” submenu) of the the BIOS. Refer to the chapter 3 for more information. BIOS. Refer to the chapter 3 for more information. Chapter 2 Hardware Installation www.dfi.com... -
Page 20: Rj45 Lan Ports
BIOS. Refer to the chapter 3 for more information. Driver Installation You may need to install the proper drivers in your system operation to use the USB device. Refer to your operating system’s manual or documentation for more information. Chapter 2 Hardware Installation www.dfi.com... -
Page 21: Audio
This jack is used to connect a headphone or external speakers. • Mic-in (Pink) This jack is used to connect an external microphone. Driver Installation Install the audio driver. Refer to the chapter 4 for more information. Chapter 2 Hardware Installation www.dfi.com... -
Page 22: I/O Connectors
Chapter 2 I/O Connectors Digital I/O Connector SATA (Serial ATA) Connectors SATA 3.0 6Gb/s SATA 0 SATA 1 SATA 2 SATA 3 Digital I/O Features The 8-bit Digital I/O connector provides powering-on function to external devices that are connected to these connectors. The pin functions of the 8-bit digital I/O connector are listed below. -
Page 23: Cooling Fan Connectors
Insufficient power supplied to the system may result in instability or the add-in boards and peripherals not functioning properly. Calculating the system’s approximate power usage is important to ensure that the power supply meets the system’s consumption requirements. Chapter 2 Hardware Installation www.dfi.com... -
Page 24: Lvds Lcd Panel Connector
Configure the LCD panel in the Advanced menu (“Video Configuration” sub- Panel Power Panel Power menu) of the BIOS. Refer to the chapter 3 for more information. Panel Power Panel Power Note: DFI board's LVDS connector: Hirose DF13-40DP-1.25V(91)/40P/1.25mm; cable side connector: Hirose DF13-40DS-1.25C. Chapter 2 Hardware Installation www.dfi.com... -
Page 25: Chassis Intrusion Connector
On Suspend) state, it will blink every second. When the system is in the S3 (STR - Suspend To RAM) state, it will blink every 4 seconds. Pin Pin Assignment Pin Pin Assignment HDD Power LED Power HDD-LED Signal PWR-LED LED Power Ground Signal RST Signal Ground RESET SW ATX-SW N.C. Signal Chapter 2 Hardware Installation www.dfi.com... -
Page 26: Standby Power Led
Failure to do so will cause severe damage to the motherboard and components. of the system chassis then connect the audio cable to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1 of the S/PDIF connector. Chapter 2 Hardware Installation www.dfi.com... -
Page 27: Smbus Connector
Intel Low Pin Count Interface Specification Revision 1.1’. The table below indicates the ® pin fuctions of the LPC connector. Pins Pin Assignment Pins Pin Assignment L_CLK L_AD1 L_RST# L_AD0 L_FRAME# L_AD3 L_AD2 INT_SERIRQ 5VSB Chapter 2 Hardware Installation www.dfi.com... -
Page 28: Expansion Slots
PCI card only) into the PCI slot. PCI Express x4 Slot Install PCI Express cards such as network cards or other cards that comply to the PCI Express specifications into the PCI Express x4 slot. Chapter 2 Hardware Installation www.dfi.com... -
Page 29: Chapter 3 - Bios Setup
When ““ appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press <Enter>. Chapter 3 BIOS Setup www.dfi.com... -
Page 30: Insyde Bios Setup Utility
1. Setting incorrect field values may cause the system to malfunction. Main Advanced Security Boot Exit 2. SD330-H110 does not support Intel AMT function. Thus there is no MEBX Comfigu- This is the help for the Project Name SD330 ration. hour, minute, second BIOS Version 66.15H... - Page 31 This field is to specify what state to go when power is re-applied after a power failue (G3 state). S0 State The system working state. S5 State Off, except for trickle current to devices such as the power button. Chapter 3 BIOS Setup www.dfi.com...
- Page 32 Boot Type : Legacy Boot Type -> Hide Primary Display & Show Boot Display Boot Type : UEFI Boot Type -> Show Primary Display & Hide Boot Display Boot Type : Dual Boot Type -> Show Primary Display & Show Boot Display Chapter 3 BIOS Setup www.dfi.com...
- Page 33 SubMenu Save and Exit HD Audio Control the detection of the HD-Audio device. Disabled HDA will be unconditionally disabled. Enabled HDA will be unconditionally enabled. Auto HDA will be enabled if present, disabled otherwise. Chapter 3 BIOS Setup www.dfi.com...
- Page 34 Chapter 3 SATA Configuration USB Configuration This section is designed to select the SATA controller and the type of hard disk drive which are This section is used to configure the parameters of the USB device. installed in your system unit. InsydeH20 Setup Utility Rev.
- Page 35 PCIe Speed Select the speed of the PCI Express Root Port: Auto, Gen1, Gen2 or Gen3. Help ↑/↓ Select Item F5/F6 Change Values Setup Defaults Exit ←/→ Select Item Enter Select SubMenu Save and Exit Chapter 3 BIOS Setup www.dfi.com...
- Page 36 Enable or disable the system/CPU smart fan/fan 2. Boundary 1 to Boundary 4 Set the boundary temperature. The range is from 0-127 Fan Speed Count 1 to Fan Speed Count 4 Set the fan speed. The range is from 1-100%. Chapter 3 BIOS Setup www.dfi.com...
- Page 37 Disable No configuration Enable User configuration Case Open RS485 Auto Flow Enable or disable the case open. Choose RS485 auto flow to be enabled or disabled. AC Power Loss Set the AC power loss always off/on. Chapter 3 BIOS Setup www.dfi.com...
-
Page 38: Security
This item can be displayed when any security mode of HDD is not Lock. Help ↑/↓ Select Item F5/F6 Change Values Setup Defaults Exit ←/→ Select Item Enter Select SubMenu Save and Exit Chapter 3 BIOS Setup www.dfi.com... - Page 39 HDD password. Help ↑/↓ Select Item F5/F6 Change Values Setup Defaults Exit ←/→ Select Item Enter Select SubMenu Save and Exit ST3160318AS (Device Name) This option allowes you to go to Storage Password List Help. Chapter 3 BIOS Setup www.dfi.com...
-
Page 40: Boot
Select the priority of boot type: Normal Boot or Advance Boot. PXE Boot Capability Disabled : Suppoort Network Stack UEFI PXE : IPv4/IPv6 Legacy : Legacy PXE OPROM only USB Boot Enable or disable the booting to USB boot devices. Chapter 3 BIOS Setup www.dfi.com... - Page 41 Select Normal Boot Option Boot Device Priority Priority or Advance Boot Option Priority Normal Boot Menu <Normal> Help ↑/↓ Select Item F5/F6 Change Values Setup Defaults Exit ←/→ Select Item Enter Select SubMenu Save and Exit Chapter 3 BIOS Setup www.dfi.com...
-
Page 42: Save & Exit
Initializing Exit ←/→ Select Item Enter Select SubMenu Save and Exit Current BIOS Model name: SD330-Q170 New BIOS Model name: SD330-Q170 Current BIOS version: 65.05A New BIOS version: 65.05A Exit Saving Changes Updating Block at FFFFF000h 100% 100% C:\SD330-Q170>_ Select this field and then press <Enter>... -
Page 43: Notice: Bios Spi Rom
When the BIOS IC needs to be replaced, you have to populate it properly onto the system board after the EEPROM programmer has been burned and follow the technical person's instructions to confirm that the MAC address should be burned or not. Chapter 3 BIOS Setup www.dfi.com... -
Page 44: Chapter 4 - Supported Software
Chapter 4 Chapter 4 - Supported Software For Windows 8.1 The DVD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the DVD into a DVD-ROM drive. The autorun screen (Mainboard Utility DVD) will appear. If after inserting the DVD, “Autorun”... - Page 45 Chapter 4 For Windows 7 Intel Chipset Software Installation Utility The Intel Chipset Software Installation Utility is used for updating Windows INF files so that ® the Intel chipset can be recognized and configured properly in the system. To install the utility, click “Intel Chipset Software Installation Utility” on the main menu. 1.
- Page 46 Chapter 4 Intel Graphics Drivers 3. Go through the readme document for more installa- tion tips then click Next. To install the driver, click “Intel Graphics Drivers” on the main menu. 1. Setup is now ready to install the graphics driver. Click Next.
- Page 47 Chapter 4 Audio Drivers 3. Go through the readme document for system re- quirements and installation To install the driver, click “Audio Drivers” on the main menu. tips then click Next. 1. Setup is ready to install the driver. Click Next. 4.
- Page 48 Chapter 4 Intel LAN Drivers 4. Click Install to begin the installation. To install the driver, click “Intel LAN Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 5. After completing installa- tion, click Finish. 2.
- Page 49 Chapter 4 Kernel Mode Driver Framework (For Windows 7 only) 3. Click “Restart Now“ to restart your computer when the installation is complete. To install the driver, click “Kernel Mode Driver Framework” on the main menu. 1. Click “Yes“ to install the update.
- Page 50 Chapter 4 Intel Management Engine Drivers 3. Setup is currently installing the driver. After installation has completed, click Next. To install the driver, click “Intel Management Engine Drivers” on the main menu. 1. Setup is ready to install the driver. Click Next. 4.
- Page 51 Chapter 4 HW Utility 3. Read the license agreement then click “I accept the terms in the license agreement”. HW Utility provides information about the board, Watchdog,and DIO. To access the utility, click Click “Next”. “HW Utility” on the main menu. Note: If you are using Windows 7, you need to access the operating system as an administrator to be able to install the utility.
- Page 52 The HW Utility icon will appear on the desktop. Double-click the icon to open the utility. 6. After completing installa- tion, click “Finish”. SD330-H110 Note: Note: The screenshot displayed above is for illustrative purpose only, and may not resemble the actual screen.
- Page 53 Chapter 4 Intel USB 3.0 Drivers (For Windows 7 and Windows 8.1) 3. Go through the readme docu- ment for more installation tips then click Next. To install the driver, click “Intel USB 3.0 Driver” on the main menu. 1. Setup is ready to install the driver. Click Next.
- Page 54 Chapter 4 IO Driver (For Windows 8.1 and Windows 10) 3. Read the file information then click Next. To install the driver, click “Intel Serial IO Driver” on the main menu 1. Setup is ready to install the driver. Click Next. 4.
- Page 55 Chapter 4 Microsoft Framework 4.5.2 (For Windows 7) 5. Setup is now installing the driver. Note: Before installing Microsoft Framework 4.5.2, make sure you have updated your Windows 7 operating system to Service Pack 3. To install the driver, click “Microsoft Framework 4.5.2” on the main menu. 1.
- Page 56 Chapter 4 Intel Rapid Storage Technology 3. Setup is now installing the driver. The Intel Rapid Storage Technology is a utility that allows you to monitor the current status of the SATA drives. It enables enhanced performance and power management for the storage subsystem.
- Page 57 Chapter 4 Infineon TPM 1.2 Driver and Tool (optional) 4. Enter the necessary information and then click Next. To install the driver, click “Infineon TPM driver and tool (option)” on the main menu. 1. The setup program is preparing to install the driver. 5.
- Page 58 Chapter 4 7. TPM requires installing the Micro- 10. Click “Yes“ to restart your system. soft Visual C++ package prior to installing the utility. Click Install. 8. The setup program is currently installing the Microsoft Visual C++ package. 9. Click Finish. Chapter 4 Supported Software www.dfi...
- Page 59 Chapter 4 Adobe Acrobat Reader 9.3 To install the reader, click “Adobe Acrobat Reader 9.3” on the main menu. 1. Click Next to install or click Change Destination Folder to select another folder. 2. Click Install to begin installa- tion. 3.
-
Page 60: Appendix A - Troubleshooting Checklist
4. There is not enough space left on the diskette. Use another diskette with adequate storage 4. Adjust the brightness of the display by turning the monitor’s brightness control knob. space. Appendix A Troubleshooting Checklist www.dfi.com... - Page 61 Nothing happens when a key on the keyboard was pressed. 1. Make sure the keyboard is properly connected. 2. Make sure there are no objects resting on the keyboard and that no keys are pressed dur- ing the booting process. Appendix A Troubleshooting Checklist www.dfi.com...
Need help?
Do you have a question about the SD330 and is the answer not in the manual?
Questions and answers