Enabling And Disabling Automatic Gain Control; Calibrating The Touch Screen - Avaya 9601 Installing And Maintaining

Configuration Parameter Name

Enabling and disabling Automatic Gain Control

About this task
Use the following procedure to turn automatic gain control for the handset, headset, and the speaker
on or off.
Procedure
1. Enter the Craft menu and select AGC.
2. Choose one of the following options:
• Handset AGC: Toggle "On" or "Off" using navigation arrow or Change softkey.
• Headset AGC: Toggle "On" or "Off" using navigation arrow or Change softkey.
• Speaker AGC: Toggle "On" or "Off" using navigation arrow or Change softkey.
3. Press Save to store the configuration.

Calibrating the touch screen

Screen calibration properly aligns the touch screen but should only be used for a significant problem
with the touch screen.
Important:
Use a pencil, a pen, or a stylus rather than your finger to touch the calibration points precisely.
Note:
The CLEAR Craft procedure clears any calibration data set using the CALIBRATE SCREEN
Craft procedure, but does not affect factory-set calibration data. Use the Default softkey to
restore factory-set calibration. Calibration results are not saved as part of a backup. The feature
is not supported on the 9641GS deskphone.
About this task
To calibrate the touch screen, use the following procedure:
Procedure
1. Enter the Craft menu using the password.
August 2016 Installing and Maintaining Avaya 9601/9608/9608G/9611G/9621G/9641G/9641GS IP
Description
- "B" if the OID is 00-1B-4F
- "E" if the OID is 00-09-6E
- "L" if the OID is 00-60-1D
- "T" if the OID is 00-07-3B
- "X" if the OID is anything else
Deskphones SIP
Comments on this document? infodev@avaya.com
Administration through the deskphone
35