Tunnel <Line> Level Commands - Lantronix XPort Pro Command Reference Manual

tunnel <line> Level Commands
Command Path: enable>tunnel #
Level Prompt: tunnel:#
Where # is the line number.
The following is a list of commands available in the tunnel level.
tunnel level commands
accept
auto show statistics
clear counters
clrscrn
connect
disconnect
exit
line <line>
lpd <line>
modem
no clear counters
packing
ppp <line>
serial
show
show history
show statistics
terminal <line>
terminal network
tunnel <line>
write
XPort Pro™ Command Reference
Description
Enters the accept level for this tunnel.
show connection statistics
Zeros all tunnel counters
Clears the screen.
Enters the connect level for this tunnel.
Enters the disconnect level for this tunnel.
Exits to the enable level.
Enters the line level.
<line> = number of the line (serial port) to be configured.
Enters the configure lpd level.
<line> = number of the line (lpd serial port) to be
configured.
Enters the modem level for this tunnel.
Unzeros all tunnel counters
Enters the packing level for this tunnel.
Enters the serial line PPP level.
Enters the serial level for this tunnel.
Displays tunneling configuration.
Displays the last 20 commands entered during the
current CLI session.
show connection statistics
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be
configured.
Enters the configure-terminal level for the network.
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be
configured.
Stores the current configuration in permanent memory.
3: Summary of CLI Commands
62