Registration - Uniden Modro 20 Owner's Manual

REGISTRATION

The handset supplied with the base is already registered. You do not have
to register it again.
To check whether a handset is registered, power on the unit and ensure
that the handset is within the range of the base. The handset's display
should show a number, (for example, HS 1 or HS 2) and the icon for signal
strength displayed on the LCD should show three bars.
If the handset unregistered, you need to register the handset following the
steps below.
# You need to operate the base and handset together.
1. On the handset, press OK and use ▲ or ▼ to scroll through the menu
list and choose REGISTRATION.
2. Press OK to confirm. The LCD will display BASE 1. (If the handset
already has been registered to a base, a "+" sign will be displayed next to
BASE 1.)
3. Press OK, the display shows PIN?, key in the 4 digit PIN (the default PIN
is 0000)
4. Press OK to confirm, and the display will show, SEARCHING 1 (or
2,3,4). Now press and hold the
confirmation tone.
18
key on the base till you hear a