Uniden Modro 20 Owner's Manual page 15

• In the standby mode, the alarm will ring at the time you set.
• When the alarm is triggered, press any key to turn it off. If a call comes
through at that time, the alarm will automatically turn off.
• To turn it off, re-enter the setting and turn it off.
• If the SNOOZE is set ON, the alarm will be repeated every 5 minutes
around 9 times. The alarm icon will flash continuously on the LCD.
When the alarm goes off, press any key, except
temporarily. The alarm will set off again in 5 minutes.
• If the SNOOZE is set OFF, the alarm will sound only once for 45
seconds.
RING SETUP
This options allows you to change ringer tones.
1. Enter the HS SETTINGS menu and press ▲ or ▼ to scroll through the
list and select RING SETUP. Press OK to confirm.
2. Press ▲ or ▼ to select between INT RING and EXT RING.
3. Press OK to confirm.
4. Press ▲ or ▼ to select between MELODY and VOLUME.
5. Press OK to confirm either of the options (MELODY or VOLUME).
6. Depending on your selection, press ▲ or ▼ to scroll through and select
the desired melody or the ringer volume level.
7. Press OK to confirm.
TONE SETTING
This option allows you to enable or disable the beep sound when a button
is pressed and when the battery or range is low.
1. Enter the HS SETTINGS menu and press ▲ or ▼ to scroll through the
list and select TONE SETTING. Press OK to confirm.
2. Press ▲ or ▼ to select between the options (KEY TONE, BATTERY
LOW, RANGE ALARM).
3. Select any one and press OK to confirm.
4. Press ▲ or ▼ to toggle between the options (ON or OFF) to turn on or
off the tone for that particular setting and press OK to confirm.
LANGUAGE
This options allows you to set the language. Default is english.
1. Enter the HS SETTINGS menu and press ▲ or ▼ to scroll through the
list and select LANGUAGE. Press OK to confirm.
2. Press ▲ or ▼ to select from the various options.
3. Press OK to confirm.
to turn it off
15