Table of Contents
Advertisement
If a handset is registered at
any time as handset 1, all
other handsets will need to
be registered again from Step
1.
If you have additional
handsets, repeat the same
process, but at Step 2 select
a number from 3 - 7 to
register the next handset as.
The Registration process
needs to be completed within
15 seconds, 5 beep tones will
indicate that the time has been
exceeded. Please start the
process again.
After Registration the
handset number is shown on
the Display screen either
during a call or while the
handset is charging (Fig 4).
14
REGISTRATION
The original handset supplied with the Main Base is already registered as Handset 1, this leaves Handset
numbers 2 - 7 available. It is very important to allocate each handset a different number to enable functions
such as Call Transfer.
Registration Process
Follow this process for each additional Handset (DSS2105) that needs to be registered to the Main Base
or for registering your Main Handset.
1. Remove the handset from its charger
2. Press flash/reg on the handset (Fig 1).
3 Press the number 2 (Fig 2) for handset 2.
Fig 1.
4. Place the handset in the Main Base Unit (Fig 3).
5. Press and hold the Registration button located on the back of the Main Base unit near the DC
power jack (Fig 3). Hold the Registration button in until a long beep confirms the handset has
been registered.
Fig 3.
HANDSET
Fig 4.
NEW:
TOTAL:
Charging
TALK HIGH
1
0
0
On a Call
REGISTER AS
HAND #2
Fig 2.
Handset
1
Registration
number
displayed
Advertisement
Table of Contents
