Planet ADN-4101 User Manual page 9

LED
WLAN
WPS
Rear Panel
The following table describes the interfaces and buttons of the device.
Interface/Button
LINE
LAN1,LAN2,
LAN3,LAN4
POWER
RESET
WPS/ WLAN
Color Status
Off
On
Green
Blinks
Off
Blinks
Green
Off
Figure 2 Rear panel
RJ-11 interface, for connecting the interface of the
telephone set through the telephone cable.
RJ-45 interface, for connecting the Ethernet interface of a
computer or an Ethernet device.
Power interface, for connecting the interface of the power
adapter.
Restore to factory defaults. To restore factory defaults,
keep the device powered on, push a paper clip into the
hole to press the button for over 3 seconds and then
release.
 Press the button and hold it for 1 second, to enable
WLAN.
 Press the button and hold it for 1 second to 3
seconds, it does not take effect.
Description
The LAN connection is not established.
The WLAN connection has been activated.
Data is being transmitted through the
WLAN interface.
The WLAN connection is not activated.
WPS is activated and the device is waiting
for negotiation with the clients.
WPS is not activated.
Description
3