Schedules - Planet ADN-4101 User Manual

In this page, you can select the interfaces on your device that use RIP of the
protocol used.
If you enable RIP, the device communicates with other devices using the routing
information protocol (RIP).Click Apply to save the settings.
3.3.12.3 Default Gateway
Choose Advanced > Routing and click Default Gateway. The page as shown in
the following figure appears:
In this page, you can select Enable Automatic Assigned Default Gateway, or
enter the information in the Use Gateway IP Address and Use Interface fields.
Click Apply to save the settings.

3.3.13 Schedules

Choose Advanced > Schedules. The page as shown in the following figure
appears:
69