Click OK to log in again.
Note:
In the LAN, you can use either of the following two levels of user accounts
(displayed in the user name/password format) to access the device:
admin/admin and user/user.
In the WAN, you can use one of the following three levels of user accounts
(displayed in the user name/password format) to access the device:
admin/admin, user/user, and support/support.
3.2 General Configuration
3.2.1
Wizard
Wizard helps you to fast and accurately configure Internet connection and other
important
parameters.
configuration parameters.
When subscribing to a broadband service, be aware of the Internect connection
mode. The physical WAN device can be Ethernet, DSL, or both. Technical
information about properties of Internet connection is provided by your Internet
service provider (ISP). For example, your ISP should inform you whether you are
connected to the Internet using a static or dynamic IP address, and the protocol,
such as PPPoA or PPPoE, that you use to communicate on the Internet.
Step 1
Choose Setup > Wizard. The page as shown in the following figure
appears:
The
following
9
sections
describe
these
various