Planet ADN-4101 User Manual page 74

The following table describes the parameters in this page.
Field
Destination Network
Address
Subnet Mask
Use Gateway IP
Address
Use Interface
Note: You can enter the gateway IP address of the device in the Use
Gateway IP Address field or set the User Interface, but cannot apply the two
settings at the same time..
3.3.12.2 Policy Route
Choose Advanced > Routing and click Policy Route. Click Add and the page
as shown in the following figure appears:
The destination IP address of the device.
The subnet mask of the destination IP address.
The gateway IP address of the device.
Select the interface of the static routing used by the
device from the drop-down list.
68
Description