Planet ADN-4101 User Manual page 69

In this page, you can set the SNMP parameters. The following table describes
the parameters in this page.
Field
Enable SNMP Agent
Read Community
Set Community
Trap Manager IP
Trap Community
Trap Version
Click Apply to save the settings.
Select or deselect the check box to enable or disable
SNMP agent.
Universal character to obtain the device information. It
is similar to the password. The SNMP application entity
can use it to directly obtain the device information.
Universal character to modify the device configuration.
It is similar to the password. The SNMP application
entity can use it to directly modify the device
configuration.
Enter the address of the server that receives the trap
message.
The field that is included in the trap message sent by
the device.
Select the trap version from the drop-down list. You can
select v1 or v2c.
63
Description