Table of Contents
Advertisement
68
EN
Child Lock
● Turn on the TV and select the video channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
You can disable the unit's operation.
A
Set the Child Lock.
Press and hold 1 on the remote control for more than
10 seconds while the unit is turned on. The unit turns off,
and "CL" appears on the front display panel.
● To release the child lock, press and hold
control until the unit turns on.
NOTES:
● When the child lock function is in use, keep the remote
control out of the children's reach.
● Timer recording programmes will be performed even if the
child lock function activated.
Scan Mode Set
(DVD deck)
This unit supports the progressive scan system (eg. 480p*) as
well as the conventional interlaced scan system (eg. 480i*).
If your TV equipped with component video connectors, supports
the progressive video input, you can enjoy a high quality picture
by setting the progressive scan mode to active.
● Refer also the instruction manuals supplied with your TV.
● If your TV equipped with component video connectors does
* 480p and 480i indicate the number of scanning lines and scanning
on the remote
1
A
During playback or while stopped, press and hold DVD
on the Remote for more than 3 seconds, to change the
scan mode between Progressive and Interlace mode.
NOTES:
● It is not possible to change the scan mode when an MP3 or
SUBSIDIARY SETTINGS (cont.)
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
not support the progressive video input, do not change the
scan mode to the "PROGRESSIVE".
format of an image signal.
● 480p indicates 480 scanning lines with progressive format.
● 480i indicates 480 scanning lines with interlaced format.
Switch the mode.
JPEG disc is loaded.
Advertisement
Table of Contents
