1. Manuals
  2. Brands
  3. JVC Manuals
  4. DVD Player
  5. HR-XV3AG
  6. Instructions manual

JVC HR-XV3AG Instructions Manual

Dvd player&video cassette recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XV3AG
INSTRUCTIONS
EN
LPT0806-001B

Advertisement

Table of Contents
loading

Related Manuals for JVC HR-XV3AG

Summary of Contents for JVC HR-XV3AG

  • Page 1 DVD PLAYER & VIDEO CASSETTE RECORDER HR-XV3AG INSTRUCTIONS LPT0806-001B...

  • Page 2: Safety First

    SAFETY FIRST Safety Precautions Use only discs marked with the following. The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE Audio CDs WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT (8 cm /12 cm disc) (8 cm /12 cm disc) EXPOSE THIS UNIT TO RAIN OR MOISTURE.

  • Page 3: Table Of Contents

    Contents POWER SYSTEM: – This set operates on voltage of AC110 240 V~ (Rating), AC90 – 260 V ~ (Operating), 50Hz/60Hz with automatic switching. SAFETY FIRST The 1 button does not completely shut off mains power from Safety Precautions ..............2 the unit, but switches operating current on and off.

  • Page 4: Disc Information

    DISC INFORMATION Region Number About Discs The world is divided into 6 regions for DVD VIDEO discs. DVD VIDEO discs are assigned a region number to indicate which Playable Discs region they may be played back in. A disc cannot be played back on this unit unless the region number of the disc matches You can use discs with the following logos for playback only.
  • Page 5 Place the disc. Marks related to audio Place the disc in the disc tray with Number of audio tracks the label side facing up. ● Since disc size changes depending on the disc to be played back, be sure to Dolby Digital mark correctly align the disc with the Dolby Laboratories has developed a digital...

  • Page 6: Index

    INDEX FRONT VIEW A STANDBY/ON Button (1) pg. 13 M Front Display Panel pg. 7 B VCR Indicator N Record Button (7) pg. 20, 23 pg. 23 C Cassette Loading Slot O Rewind Button (3) pg. 20, 21, 35 D VCR/DVD Button P Fast Forward Button (5) pg.

  • Page 7: Front Display Panel

    FRONT DISPLAY PANEL A Progressive Mode Indicator E VCR Mode Indicator B Timer (#) Indicator F Cassette Type Indicator pg. 28, 29 C Satellite Auto Recording Indicator (N) pg. 31 G Tape Remaining Time Indicator pg. 24 D Channel/Clock Display H DVD Mode Indicator Mode Display (L-1 or F-1) Counter Display...
  • Page 8 +: brightens the display The remote control can operate most of your unit’s functions, –: darkens the display as well as basic functions of TV sets of JVC and other brands. Y Programme Button (PR +/–) pg. 23 pg. 61) Z Programming Button (PROG) pg.

  • Page 9: Installing Your New Unit

    INSTALLING YOUR NEW UNIT It’s essential that your unit be properly connected. Basic Connections THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. Check the contents. TV aerial cable Make sure the package contains all of the accessories listed in “SPECIFICATIONS”...

  • Page 10: S-Video Connection (Dvd Deck)

    INSTALLING YOUR NEW UNIT (cont.) S-VIDEO Connection (DVD deck) AUDIO IN connectors Back of TV S-Video cable S-VIDEO IN (not provided) connector Audio cable Aerial connector (not provided) TV aerial cable Mains outlet S VIDEO Mains power cord INPUT (L-1) S VIDEO VIDEO VIDEO...

  • Page 11: Component Video Connection (Dvd Deck)

    Component Video Connection (DVD deck) ATTENTION Be sure to connect the unit’s VIDEO OUT or S VIDEO OUT connector to the TV’s VIDEO IN or S-VIDEO IN connector. AUDIO IN connectors Back of TV S Video cable (not provided) COMPONENT VIDEO IN connector Audio cable (not provided) TV aerial...

  • Page 12: Initial Settings

    China, Mongolia, Russia neighbouring channels. ● If you cannot obtain the two vertical white bars clearly with Hong Kong any channel between 28 and 60, consult your JVC dealer. Australia Exit the Video Channel Set mode. Press OK on the remote control.

  • Page 13: Auto Set Up

    Auto Set Up Set the date. Press rt to set the date, then press OK or e. ● Press and hold rt to change the date by 15 days. The Auto Set Up simplifies installation by guiding you through the procedures of setting the clock and tuner channels –...

  • Page 14: Monitor Set (Dvd Deck)

    INITIAL SETTINGS (cont.) Monitor Set Select the DVD deck. On the unit (DVD deck) Press VCR/DVD repeatedly so that the DVD indicator lights up. You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for On the remote control wide-screen TVs.
  • Page 15 Pan&Scan/Letter Box In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio. Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” and “Letter Box”.

  • Page 16: Language

    INITIAL SETTINGS (cont.) Language Select the language. Press rt to move the highlight bar (pointer) to the ● Turn on the TV and select the video channel (or AV language of your choice mode). (English, Russian or Arabic). ● Slide the TV/VCR/DVD switch to the right. On-screen Language Set (VHS deck) Turn on the unit.
  • Page 17 On-screen Language Set (DVD deck) Menu/Audio/Subtitle Language Set This DVD deck offers you the choice to view on-screen Some DVD discs contain the DVD menu display, audio, messages in 3 different languages. You can change the subtitle in multiple languages. With these discs, you can language setting manually as required.

  • Page 18: Language Code List

    INITIAL SETTINGS (cont.) Language Code List Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Russian Ameharic Hebrew Kinyarwanda Arabic Yiddish Sanskrit Assamese Javanese Sindhi Aymara Georgian Sangho Azerbaijani Kazakh Serbo-Croatian Bashkir Greenlandic Singhalese Byelorussian Cambodian Slovak Bulgarian Kannada Slovenian Bihari Korean (KOR) Samoan Bislama...

  • Page 19: Clock Set

    Clock Set Access the Clock Set screen. Press rt to move the highlight bar (pointer) to “CLOCK SET”, then press OK or e. The Clock Set screen appears. ● Turn on the TV and select the video channel (or AV mode).

  • Page 20: Operations On Vhs Deck

    OPERATIONS ON VHS DECK Basic Playback Load a cassette. Make sure the window side is up, the rear label side is ● Turn on the TV and select the video channel (or AV facing you and the arrow on mode). the front of the cassette is ●...

  • Page 21: Playback Features

    Skip Search Playback Features During playback, press 1 to 6 times to skip over unwanted sections. Each press initiates a 30-second period of fast-motion ● Turn on the TV and select the video channel (or AV playback. Normal playback resumes automatically. mode).

  • Page 22: Manual Tracking

    OPERATIONS ON VHS DECK (cont.) Manual Tracking Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons. Override automatic tracking. During playback, press p on the remote control.

  • Page 23: Basic Recording

    Basic Recording Set the tape speed. Press p. The current setting appears on the front display panel or TV screen. Press p again to change ● Turn on the TV and select the video channel (or AV the setting while the tape speed is displayed on the TV mode).

  • Page 24: Recording Features

    OPERATIONS ON VHS DECK (cont.) Set the recording duration. Recording Features If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes. ● Turn on the TV and select the video channel (or AV NOTES: mode).

  • Page 25: B.e.s.t. Picture System

    Receiving Stereo and Bilingual B.E.S.T. Picture System Programmes The B.E.S.T. (Biconditional Equalised Signal Tracking) Your unit is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of system checks the condition of the tape in use during stereo and bilingual broadcasts possible.

  • Page 26: G- Code ™/Show View ™ System Setup

    OPERATIONS ON VHS DECK (cont.) ™/S ™ CODE Enter the Receiving channel position number. System Setup Then press rt or number G-CODE/SHOWVIEW SETUP keys to input the number of the unit s channel position on ’ GUIDE PROG TV PROG which the Guide Program The G- timer programming system eliminates the need to...

  • Page 27: Timer Programming

    ™/S ™ CODE Access the G- screen. CODE Timer Programming Press PROG. With the G- ™/S ™ system, timer programming is CODE greatly simplified because each TV programme has a corresponding code number which your unit is able to recognize. G-CODE/SHOWVIEW SYSTEM INFORMATION and S...
  • Page 28 OPERATIONS ON VHS DECK (cont.) Return to the normal screen. ATTENTION Guide Program Number Set Press PROG or OK. “PROGRAM COMPLETED” appears “G- ™/S ™ CODE on the TV screen for about 5 seconds, then the normal G-CODE/SHOWVIEW SETUP SETUP” appears screen appears.

  • Page 29: Express Timer Programming

    Express Timer Enter the programme start time. Programming Press START +/– to enter the time you want recording to start. ● Press and hold START +/– to If you do not know the G- number for the programme you CODE wish to record, use the following procedure to set your unit to move in 30-minute timer-record the programme.
  • Page 30 OPERATIONS ON VHS DECK (cont.) Check, cancel and change programmes To Timer-Record Weekly Or Daily Serials: — anytime during steps D through H, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears Disengage the timer mode.

  • Page 31: Automatic Satellite Programme Recording

    Cancel or change programme setting. To cancel a programme, press & when the Programme screen you do not want is shown. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. To change a programme, press the appropriate button: START +/–, STOP +/–, DATE +/–, PR +/–, DAILY (number key “8”), WEEKLY (number key “9”) and/or p when the Programme screen on which you want to make...
  • Page 32 OPERATIONS ON VHS DECK (cont.) ● Operation on the DVD deck is not possible when the Automatic Satellite Program Recording mode is engaged, or Before performing the following steps: Timer Recording is in progress. ● Make sure the satellite receiver is connected to the unit’s ●...

  • Page 33: Operations On Dvd Deck

    OPERATIONS ON DVD DECK To play back an MP3/JPEG disc, see pages 51 – 56. Basic Playback Load the disc. A Press x on the DVD deck to open the disc tray. ● The unit’s power comes on ● Turn on the TV and select the video channel (or AV automatically.

  • Page 34: Playback Features

    OPERATIONS ON DVD DECK (cont.) Locating a desired scene using the Playback Features DVD menu ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. DVD VIDEO discs may have two types of menus; top menu and disc menu.

  • Page 35: Slow Motion

    Still Picture/Frame-By-Frame Playback Pause during playback. Press 9. Activate frame-by-frame playback. Press 9 to advance a still picture. ● To resume normal playback, press 4. Slow Motion During playback, press 9, then press 3 for reverse slow motion playback, or 5 for forward slow motion playback.
  • Page 36 OPERATIONS ON DVD DECK (cont.) 3D Phonic ● If you stop the playback of a disc for which an resume point has already been memorized, the memory will be updated with the new resume point. ● After the unit has memorized the resume point for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point.

  • Page 37: Adjusting The Picture Quality

    To adjust picture appearance manually Access the USER menu. Press w e repeatedly to select “USER 1” or “USER 2”. USER 1 GAMMA BRIGHTNESS CONTRAST SATURATION TINT SHARPNESS Y DELAY Select the parameter. Press rt repeatedly to select a parameter you want to adjust, then press OK.

  • Page 38: Using The On-Screen Bar

    OPERATIONS ON DVD DECK (cont.) Basic operation on the on-screen bar Using the on-screen bar Example: When selecting the Repeat mode of DVD During playback or while stopped You can check disc information while the disc is loaded and you Access the on-screen bar.
  • Page 39 Repeat Playback You can repeat playback as you like according to the type of disc. DVD VIDEO: during playback Audio CD: during playback or in stop mode Video CD/SVCD: in stop mode or during playback with PBC disactivated When using the on-screen bar Access the on-screen bar.
  • Page 40 OPERATIONS ON DVD DECK (cont.) A-B Repeat Playback To clear the on-screen bar Press PLAY SETUP. To cancel Repeat Playback Repeat from step A, select “OFF” in step C, then press You can repeat the desired part. When using the REPEAT button: Access the on-screen bar.

  • Page 41: Time Search

    Example: To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed TIME _ : _ _ : _ _ TIME _ : _ _ : _ _ TIME 2 : _ _ : _ _ Press 2 Press 3 TIME _ : _ _ : _ _ TIME 2 : 3 _ : _ _...
  • Page 42 OPERATIONS ON DVD DECK (cont.) Programme Playback Select the chapter. Press the number keys (0-10) to enter the desired chapter number, then press OK. You can play back up to 99 tracks in the desired order. ● The unit starts playback from the selected chapter. Access the on-screen bar.

  • Page 43: Subtitle Selection

    Subtitle Selection You can select subtitle language. ● During playback When using the on-screen bar Access the on-screen bar. Press PLAY SETUP twice. The on-screen bar appears on the TV screen. Select the menu item. Press w e to move H to , then press OK.

  • Page 44: Angle Selection

    OPERATIONS ON DVD DECK (cont.) When using the ANGLE button: Select the subtitle language. Access the menu. Press rt or SUB TITLE repeatedly to select the desired subtitle language, then press OK. Press ANGLE. ● Each time you press the button, the subtitle language changes. ●...

  • Page 45: Audio Language Selection

    Select the audio language. Press rt repeatedly to select the desired audio language, then press OK. ● Each time you press the button, the audio language changes. To clear the on-screen bar Press PLAY SETUP. NOTES: ● Some audio languages are abbreviated in the pop-up window. See “Language Code List”...
  • Page 46 OPERATIONS ON DVD DECK (cont.) Audio Channel Selection When using the A.MONITOR button: Access the menu. Press A.MONITOR. When you play certain karaoke (DVD/Video CD/SVCD), you can ● The following pop-up window appears on the TV screen. enjoy karaoke by selecting the audio channel to play. Example: “ST”...

  • Page 47: Parental Lock

    Parental Lock Access the “PARENTAL LOCK“ menu. This function restricts playback of DVD VIDEO discs which Press rt repeatedly to move contain violent (and other) scenes according to the level set by H to “PARENTAL LOCK“, then the user. For example, if a movie which includes violent scenes press OK.
  • Page 48 OPERATIONS ON DVD DECK (cont.) To change the settings To temporarily release the Parental Lock You can change the Parental lock settings later. When you set the parental level strictly, some discs may not be Access the Parental Lock screen. played back at all.
  • Page 49 Country/Area Code List for Parental Lock Andorra Spain United Arab Emirates Ethiopia Afghanistan Finland Antigua and Barbuda Fiji Anguilla Falkland Islands (Malvinas) Albania Micronesia (Federated States of) Armenia Faroe Islands Netherlands Antilles France Angola France, Metropolitan Antarctica Gabon Argentina United Kingdom American Samoa Grenada Austria...
  • Page 50 OPERATIONS ON DVD DECK (cont.) Saint Lucia Saudi Arabia Liechtenstein Solomon Islands Sri Lanka Seychelles Liberia Sudan Lesotho Sweden Lithuania Singapore Luxembourg Saint Helena Latvia Slovenia Libyan Arab Jamahiriya Svalbard and Jan Mayen Morocco Slovakia Monaco Sierra Leone Moldova, Republic of San Marino Madagascar Senegal...

  • Page 51: About Mp3 Disc

    NOTES: About MP3 Disc ● Because of the disc characteristics or recording condition, some discs may not be played back or it takes time to start This unit can playback CD discs recorded in the MP3 format (we playback. refer to those discs as MP3 discs in this manual). ●...

  • Page 52: Mp3 Playback

    OPERATIONS ON DVD DECK (cont.) MP3 Playback Select the mode. Be sure to set “MP3/JPEG” to “MP3” before loading a disc. ( pg. 70) ● You cannot access the DVD Set Up screen and “X” appears You can search and play back desired groups and tracks using on the TV screen if a disc is already placed.
  • Page 53 Repeat Playback You can repeat playback of the current group, track or all groups. ● While MP3 control display is on the TV: Access the repeat mode. Press PLAY SETUP during playback. ● The current repeat mode is displayed on the MP3 control display.

  • Page 54: About Jpeg Disc

    OPERATIONS ON DVD DECK (cont.) NOTES: About JPEG Disc ● We recommend to record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, This unit can playback CD discs recorded in the JPEG format (we it will take a longer time to be displayed.) refer to those discs as JPEG discs in this manual).

  • Page 55: Jpeg Playback

    JPEG Playback Select the mode. Be sure to set “MP3/JPEG” to “JPEG” before loading a disc. ( pg. 70) ● You cannot access the DVD Set Up screen and “X” appears You can search and play back desired groups and files using the on the TV screen if a disc is already placed.
  • Page 56 OPERATIONS ON DVD DECK (cont.) Repeat Playback You can repeat playback of the current group, file or all groups. ● While JPEG control display is on the TV: Access the repeat mode. Press PLAY SETUP while the JPEG Control screen is displayed.

  • Page 57: Editing (Vhs Deck)

    ● When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit. ● When a Master Edit Control-equipped JVC camcorder is used, Recorder the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

  • Page 58: Edit To Or From Another Video Recorder

    EDITING (VHS DECK) (cont.) Edit To Or From Another Slide the TV/VCR/DVD switch to the right. Video Recorder Make connections. You can use your unit as the source player or as the A When using your unit as the source player: recording deck.

  • Page 59: Dubbing (From Dvd To Vhs)

    Dubbing Prepare the DVD deck for dubbing. A Press DVD. (from DVD to VHS) B Start playback and search for the point where you want to start dubbing by pressing 4, 5 or 3. You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.

  • Page 60: Editing (Dvd Deck)

    EDITING (DVD DECK) You can dub selected audio from the DVD or Audio CD disc to Digital Audio Dubbing an MD etc. However, it is not possible to dub copy-protected discs. Example: Dubbing to an MD ● Turn on the TV and select the video channel (or AV mode).

  • Page 61: Remote Control

    Press the number key “1” for A, “2” for B, “3” for C or “4” for D. The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send A code Set the remote control code.
  • Page 62 Your remote control can operate the basic functions of your TV Keep pressing VCR down during step A. set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled. Enter your TV’s brand code using the number keys, then press OK.

  • Page 63: System Connections

    SYSTEM CONNECTIONS Connecting To A Satellite Receiver NOTES: Connect the satellite receiver to the AUDIO/VIDEO IN connectors, then connect the AUDIO/VIDEO OUT or ● You cannot use Automatic Satellite Programme Recording S VIDEO OUT connectors to the TV’s connectors. function if you connect the satellite receiver with S-video cable ( pg.

  • Page 64: Connecting To A Dolby Digital Decoder Or An Amplifier With A Built-In Dts (Dvd Deck)

    SYSTEM CONNECTIONS (cont.) Connecting To A Dolby NOTES: ● For Dolby Digital sound, set “DIGITAL AUDIO OUTPUT” to Digital Decoder or An “DOLBY DIGITAL/PCM”. ( pg. 70) ● For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/ PCM”. ( pg. 70) Amplifier With A Built-in CAUTIONS: DTS (DVD deck)

  • Page 65: Subsidiary Settings

    SUBSIDIARY SETTINGS Function Set (VHS deck) Turn on the unit. Press 1. You can change various mode settings on the Function Set screen by following the procedure described below. ● For each mode setting, see pages 66 to 67. Select the VHS deck. On the unit ●...
  • Page 66 SUBSIDIARY SETTINGS (cont.) * The default setting is bold in the table below. NTSC — NTSC3.58 / NTSC4.43 / NTSC 8 B.E.S.T. — ON / OFF To record NTSC signals or playback a NTSC tape, it will be You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) necessary to select the appropriate mode.
  • Page 67 8 VIDEO STABILIZER — ON / OFF When this function is set to “ON”, you can automatically correct vertical vibration in the picture when playing back unstable recordings made on another recorder. NOTES: ● When you finish viewing a tape, be sure to set this function to “OFF”.

  • Page 68: Child Lock

    SUBSIDIARY SETTINGS (cont.) Child Lock Scan Mode Set (DVD deck) ● Turn on the TV and select the video channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. ● Turn on the TV and select the VCR channel (or AV mode).

  • Page 69: Mode Set (Dvd Deck)

    ● The procedure shows how to set “RESUME” to “ON” Mode Set (DVD deck) on the DVD Set Up menu screen as an example. You can change various mode settings on the Mode Set Turn on the unit. screen by following the procedure described below. ●...
  • Page 70 SUBSIDIARY SETTINGS (cont.) Audio Settings * The default setting is bold in the table below. Picture Settings 8 DIGITAL AUDIO OUTPUT — PCM ONLY / DOLBY DIGITAL/PCM / STREAM/PCM 8 MONITOR TYPE — Set to the appropriate mode according to the type of the device 16:9 NORMAL/16:9 MULTI NORMAL / connected to DIGITAL AUDIO OUT connector on the rear of 16:9 AUTO/16:9 MULTI AUTO /...
  • Page 71 Output Playback discs STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD VIDEO with 48 kHz, 16/20/24 bit linear 48 kHz, 16 bit linear PCM DVD VIDEO with DTS DTS bitstream 44.1 kHz, 16 bit stereo linear PCM DVD VIDEO with Dolby 48 kHz, 16 bit stereo linear Dolby Digital bitstream Digital Audio CD/Video CD...

  • Page 72: Tuner Set

    SUBSIDIARY SETTINGS (cont.) Tuner Set Access the Auto Channel Set screen. A Press rt to move the TUNER SET highlight bar (pointer) to IMPORTANT FUNCTION SET “TUNER SET”, then press TUNER SET Perform the following steps only if — OK or e. INITIAL SET —...
  • Page 73 Manual Channel Set Set the station. Store channels that were not stored during Auto Set Up The screen to the right pg. 13) or Auto Channel Set ( pg. 72). appears when the station is STORE detected. Access the Main Menu screen. CONTINUE If you do not want to store Press SET UP MENU.
  • Page 74 SUBSIDIARY SETTINGS (cont.) Delete A Channel Fine Tuning Channels Already Stored Perform steps A and C of “Manual Channel Set” on page 73 Perform steps A to C of “Manual Channel Set” on page 73 to to access the channel list screen before continuing. access the channel list screen before continuing.

  • Page 75: Information On Multi-System Compatibility

    Off-Air Recording The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts. Recorded tape TV System HR-XV3AG Multi-system tuner (B/G, I, D/K) NOTE: This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).
  • Page 76 TV system you have selected at the TV System Select screen. Tape-To-Tape Editing There are 3 different types of recorded tape, depending on the signal recorded. Recorded tape Playback equipment HR-XV3AG Dubbed tape Recording circuit...

  • Page 77: Troubleshooting

    No power is supplied to the unit. ● The video heads may be dirty. ● The mains power cord is disconnected. ]Use a dry cleaning cassette ECL-3F, or consult your JVC ]Connect the mains power cord. dealer. The remote control won’t function.
  • Page 78 TROUBLESHOOTING (cont.) JPEG Playback (DVD deck) Changing audio/subtitle language is not possible. ● The disc does not contain audio/subtitles in multiple A disc cannot be played. languages. ● No JPEG files are recorded to the disc. ]With some discs, the language should be set on the top menu. ]Replace the disc.
  • Page 79 TIMER RECORDING (VHS deck) OTHER PROBLEMS Timer recording won’t work. Whistling or howling is heard from the TV during camcorder recording. ● The clock and/or the timer have been set incorrectly. ● The camcorder’s microphone is too close to the TV. ]Re-perform the clock and/or timer settings.

  • Page 80: Specifications

    SPECIFICATIONS GENERAL VIDEO/AUDIO (DVD deck) Power requirement : AC 110 V – 240 V , 50 Hz/60 Hz Signal system : NTSC 3.58 Power consumption Applicable disc : DVD (12 cm, 8 cm) Power on : 26 W CD (12 cm, 8 cm) Power off : 6.0 W Audio characteristics...

  • Page 81: List Of Terms

    LIST OF TERMS ..........40 ..........54 A-B Repeat Playback JPEG control display About Discs .............. 54 JPEG Language .............. 51 ..... 17 Menu/Audio/Subtitle Language Set ..........5 Placing a Disc ....16 On-screen Language Set (VHS deck) ..........4 Playable Discs ............
  • Page 82 LIST OF TERMS (cont.) ..........43 Random Playback ..24 Record One Programme While Watching Another ............ 23 Recording – ........23 Recording Resume Function ............. 4 Region Number ........61 Remote Control Functions ......... 22 Repeat Playback ..........35 Resume Function ............
  • Page 84 Printed in China 0204ASR-MR-BJ...

Table of Contents