JVC HR-XV3AG Instructions Manual page 78

78
EN
Changing audio/subtitle language is not possible.
● The disc does not contain audio/subtitles in multiple
languages.
]With some discs, the language should be set on the top menu.
( pg. 34)
The subtitles do not appear on the TV screen.
● The disc does not contain subtitles.
● The subtitle display is set to off.
]Set the subtitles display to on. (
● A-B Repeat Playback is in progress. (
]The subtitles recorded around point A-B may not appear.
Angle cannot be changed.
● The scene is not recorded from multiple angles.
MP3 Playback (DVD deck)
A disc cannot be played.
● No MP3 files are recorded to the disc.
]Replace to the disc with MP3 files are recorded.
● MP3 files do not have the correct file extension in their file
names.
]Add correct file extension (for example .mp3, .MP3 or any
uppercase and lowercase combination such as ".Mp3") to
their file names.
● MP3 files are not recorded in a format compliant with ISO
9660 Level 1 or 2.
]Replace the disc. (Record MP3 files using a compliant
application.)
● The different types of files are recorded to the disc.
]The disc which contains the different types of files may not be
played because of its disc characteristics or recording
conditions.
Not MP3 files but JPEG files are played.
● The MP3/JPEG setting is set to "JPEG".
]When both MP3 files and JPEG files are recorded to a disc, set
"MP3/JPEG" to "MP3" to play MP3 files. (
The MP3 control display appears on the TV screen, but no
operation can be performed.
● No MP3 files or JPEG files are recorded to the disc, or the disc
is an unplayable disc (such as CD-ROM).
]Replace the disc.
pg. 43)
pg. 53)
pg. 70)
TROUBLESHOOTING (cont.)
JPEG Playback (DVD deck)
A disc cannot be played.
● No JPEG files are recorded to the disc.
]Replace the disc.
● JPEG files do not have the correct file extension in their file
names.
]Add correct file extension (.jpg, .jpeg, .JPG, .JPEG or any
uppercase and lowercase combination such as ".Jpg") to their
file names.
● JPEG files are not recorded in a format compliant with ISO
9660 Level 1 or 2.
]Replace the disc. (Record JPEG files using a compliant
application.)
Not JPEG files but MP3 files are played back.
● The MP3/JPEG setting is set to "MP3".
]When both MP3 files and JPEG files are recorded to a disc, set
"MP3/JPEG" to "JPEG" to play JPEG files. (
RECORDING (VHS deck)
Recording cannot be started.
● There is no cassette loaded, or the cassette loaded has had its
record safety tab removed.
]Insert a cassette, or using adhesive tape, cover the hole where
the tab was removed.
TV broadcasts cannot be recorded.
● "L-1" or "F-1" has been selected as the input mode.
]Set to the desired channel.
Tape-to-tape editing is not possible.
● The source (another video recorder, camcorder) has not been
properly connected.
]Confirm that the source is properly connected.
● All necessary power switches have not been turned on.
]Confirm that all units' power switches are turned on.
● The input mode is not correct.
]Set the input mode to "L-1" or "F-1".
Camcorder recording is not possible.
● The camcorder has not been properly connected.
]Confirm that the camcorder is properly connected.
● The input mode is not correct.
]Set the input mode to "L-1" or "F-1".
" " and " " on the front display panel won't stop blinking.
● The end of the tape was reached during recording.
]The programme may not have been recorded in its entirety.
Next time make sure you have enough time on the tape to
record the entire programme.
The channel cannot be changed.
● Recording is in progress.
]Press 9 to pause the recording, change channels, then press
4 to resume recording.
pg. 70)