Table of Contents
Advertisement
26
EN
G-
™/S
CODE
System Setup
The G-
timer programming system eliminates the need to
CODE
input channel, date, start and stop time data when setting the
timer record function.Simply key in the G-
TV programme you wish to record (found in most TV listings)
and the unit's timer is automatically programmed.
You have to set Guide Program numbers, which are assigned to
each station for purposes of ShowView timer programming, for
all the stations stored in your unit's memory to get proper results.
Before G-
setup you must have performed Auto Setup
CODE
(
pg. 13)
IMPORTANT
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
INFORMATION
G-
and S
V
are different trademarks used to
CODE
HOW
IEW
represent the same easy recording feature, but only the term
G-
system will be used in the instructions. If you use the
CODE
S
V
system, follow the same instructions listed for
HOW
IEW
the G-
system.
CODE
Turn on the TV and select the video channel (or AV mode).
Guide Program Number Set
A
Access the Main Menu screen.
Press SET UP MENU.
B
Access the Initial Set screen.
Press rt to move the highlight bar (pointer) to "INITIAL
SETUP", then press OK or e.
C
Access the Guide Program Set screen.
Press rt to move the highlight bar (pointer) to "G-
S
V
SETUP", then press OK or e.
HOW
IEW
D
Enter the Guide Program number.
Press rt or number keys to
enter the Guide Program
number for the desired
station as shown in the TV
listings. Then press OK or e.
V
™
HOW
IEW
number for the
CODE
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
2
5
[0-9] OR [ / ]:SELECT
[MENU] : EXIT
OPERATIONS ON VHS DECK (cont.)
E
Enter the Receiving channel position number.
Then press rt or number
keys to input the number of
the unit
s channel position on
'
which the Guide Program
number
s broadcast is
'
received by the unit. Then
press OK or e.
● If the satellite broadcast is
received on your unit's
auxiliary channel "L-1", select
"L-1" for the channel position.
● Repeat steps D and E as necessary.
F
Return to the normal screen.
Press SET UP MENU.
Guide Program Number
Guide Program (GUIDE PROG) number
"
assigned TV station numbers,according to broadcast
area, for G-
CODE
numbers can be found in most TV listings.
/
CODE
G-CODE/SHOWVIEW SETUP
GUIDE PROG
2
[0-9] OR [ / ]:SELECT
[MENU] : EXIT
"
timer recording. The Guide Program
TV PROG
5
refers to the
Advertisement
Table of Contents
