JVC HR-XV3AG Instructions Manual page 74

74
EN
Delete A Channel
Perform steps A and C of "Manual Channel Set" on page 73
to access the channel list screen before continuing.
A
Select the channel.
Press rt until the channel you want to delete begins
blinking.
B
Delete a channel.
Press &.
● To re-store it, simply press w.
● The item directly beneath the cancelled one moves up one
line.
● Repeat steps A and B as necessary.
C
Return to the normal screen.
Press SET UP MENU.
Swap Channel Position
Perform steps A to C of "Manual Channel Set" on page 73 to
access the Channel List screen before continuing.
A
Select the position (e.g. 03).
Press rt until the section of CH "03" begins blinking,
then press OK or e.
● Only "03" will blink.
B
Select the position (e.g. 09).
Press number keys to input "0" and "9".
● The two selected channels will be swapped.
● To cancel the channel swapping, press w.
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[0 – 9] : INPUT CH
: FINE TUNING
[MENU] : EXIT
● Repeat steps A and C as necessary.
C
Store the new position.
Press OK or e.
D
Return to the normal screen.
Press SET UP MENU.
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 355 BG 09 195 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[ ] : CANCEL
: OK
[MENU] : EXIT
SUBSIDIARY SETTINGS (cont.)
Fine Tuning Channels Already Stored
Perform steps A to C of "Manual Channel Set" on page 73 to
access the channel list screen before continuing.
A
Select the channel to fine-tune.
Press rt until the channel you want to tune begins
blinking, then press OK twice.
● The "FRQ" number for the channel starts blinking.
B
Perform tuning.
Press rt until the picture is its clearest. Then press OK
or e.
● Repeat steps A and B as necessary.
C
Return to the normal screen.
Press SET UP MENU.
TV System Selection
the picture but the audio can't be
heard or sounds unnatural
Perform steps A and C of "Manual Channel Set" on page 73
to access the Channel List screen before continuing.
A
Select the channel.
Press rt until the channel
you want to change its TV
system begins blinking,
then press OK three times.
● The "SYS" display for that
channel starts blinking.
B
Select the TV system.
Press rt to select the appropriate TV system
(B/G]D/K]I). Then press OK or e.
● Repeat steps A and B as necessary.
C
Return to the normal screen.
Press SET UP MENU.
When you see
—
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[ ] : SELECT SYSTEM
: OK
[MENU] : EXIT