Removing And Installing The Door Panels - Bosch HEN301.1S Instruction Manual

Removing and
installing the door
panels
Removal
Installation
20
To facilitate cleaning, you can remove the glass panels from
the oven door.
1. Detach the oven door and lay on a cloth with the handle
facing down.
2. Unscrew the cover on top of the oven door. To do this,
undo the right and left hand screws (Fig. A).
3. Lift and pull out the upper panel (Fig. B).
A
4. Unscrew the brackets on the right and left. Lift the panel
and remove the brackets from the panel (Fig. C). Take out
the panel.
C
Clean the panels with glass cleaner and a soft cloth.
Do not use sharp or abrasive materials or a glass scraper.
The glass could be damaged.
During installation, make sure that the lettering "right above"
is upside down at the bottom left.
1. Insert the panel downwards at an angle (Fig. A).
2. Push on the brackets on the right and left, align them and
screw in place (Fig. B).
B