Error Messages/Troubleshooting; Cleaning And Storing The Unit; Technical Specifications - Sanitas SBM 18 Instructions For Use Manual

8. Error messages/troubleshooting

In the event of errors, the error message _ appears on the
screen.
Error messages may appear if:
• It was not possible to correctly record the pulse:
• No measurement could be taken:
• The cuff is fastened too tightly or loosely:
• Errors occur during the measurement:
• The pump pressure is higher than 300 mmHg:
• There is a system error. If this error message appears,
please contact Customer Services:
• The batteries are almost empty:
In such cases, repeat the measurement. Ensure that you do
not move or speak.
If necessary, reinsert or replace the batteries.

9. Cleaning and storing the unit

• Clean your blood pressure monitor carefully using a
slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances should you hold the device
under water, as this can cause liquid to enter and damage
the device.
• If you store the unit, no heavy objects should be placed
on top of it. Remove the batteries. The cuff line should not
be bent sharply.
1
;
2
;
3 ;
4 ;
5 ;
6 .
.

10. Technical specifications

Model No. SBM 18
Measurement Oscillometric, non-invasive blood pres-
method sure measurement on the upper arm
Measurement Cuff pressure 0-300 mmHg,
range Systolic 50-280 mmHg,
Diastolic 30-200 mmHg,
Pulse 40-199 beats/minute
Display accuracy Systolic ± 3 mmHg,
Diastolic ± 3 mmHg,
Pulse ± 5% of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
Systolic 8 mmHg /
Diastolic 8 mmHg
Memory 4 x 30 memory spaces
Dimensions L 112 mm x W 110 mm x H 53 mm
Weight Approximately 219 g (without batteries
and cuff)
Cuff size 22 to 36 cm
Permissible opera- +10°C to +40°C, 15-85% relative humi-
ting conditions dity (non-condensing)
24