Download Print this page

Electrical Connection - AEG S72100WSB1 User Manual

Advertisement

Available languages

Available languages

52

eLeCTriCaL CoNNeCTioN

Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to
your domestic power supply. voltage
can vary by ±6% of the rated voltage.
For operation with different voltages,
a suitably sized auto-transformer must
be used.
iNSTaLLaTioN
imPorTaNT!
in order to reserve the required
space around the refrigerator
for ventilation, please keep
100mm distance between
2 sides and top of the wine
refrigerator and the wall and
50mm distance between rear
of refrigerator and the wall.
The appliance must be earthed
the power supply cable plug is
provided with a contact for this
purpose. if the domestic power
supply socket is not earthed, connect
the appliance to a separate earth in
compliance with current regulations,
consulting a specialist technician.
The Manufacturer declines all
responsibility if the above safety
precautions are not observed.
this appliance complies with
the e.e.C. directives.
Door reVerSiBiLiTy
Before carrying out any operations,
remove the plug from the power
socket. to change the opening
direction fo the door, proceed as
follows:
1. remove the two screws at the rear
of the top cover.
2. push the top cover forward until it is
free. and move the small plate from
left to right. then put the top cover
on a safe place to avoid scratch.

Advertisement

loading