ESAB EPP-200 Instruction Manual page 94

SECTION 3
3.5 Connecting Plasma Torches to EPP-200 Console and Options
3.5.1 EPP-200 Output Cables, Hoses and Adapters (customer supplied)
EPP-200:
Lengths vary depending on system.
• Coolant Return
• Coolant Supply
• Pilot Arc Cable
• Electrode Cable
• Shield Gas (directly to the Plumbing Box)
• Start Gas (directly to the Plumbing Box)
• Cut Gas (directly to the Plumbing Box)
• Work Cable
• Pendant Cable (if pendant option is ordered)
See Description, Section 2 for part numbers.
A remote SETUP Panel option is available on Avenger 1 and larger ESAB
cut cutting machines. This panel operates the same as the pendant.
Refer to your machine manual for replacement parts.
94
INSTALLATION