Nortel 2330 Installation Manual page 55

Figure 30. Step 8—Cable Placement
8
Install the Kensington lock (optional).
a
Loop the Kensington lock's cable around an object that cannot be moved or damaged by a person
pulling on the cable.
b
Insert the key into the Kensington lock.
c
Insert the Kensington lock into the security slot on the AP.
d
Rotate the key right or left to secure the lock to the AP.
e
Pull on the lock to verify that it is secured to the AP.
f
Remove the key.
9
Place the AP on the bracket, making sure to remove any slack that occurs in the cable between the bracket
and the AP.
10 Lock the AP onto the bracket by inserting the 3-mm or 1/8-inch screwdriver into the Lock hole on the
access point as shown in
Warning!
locked onto the bracket before releasing it.
Installing and connecting an AP-2330/2330A/2330B 55
Ferrite Beaded Cable
Universal mounting bracket
Figure 31.
To prevent possible damage to the AP, make sure the device is fully
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide