Ap Technical Specifications - Nortel 2330 Installation Manual

AP technical specifications

This appendix lists the technical specifications for the Nortel AP-2330/2330A/2330B access points.
mechanical and compliance specifications.
radio specifications. Table 10 on page 114
(For specifications for the WSS, see the Nortel WLAN-Security Switch 2300 Series Configuration Guide.)
Note.
The AP-2330, AP-2330A, and AP-2330B access points are designed and
approved to be used only with Nortel WLAN—Security Switch (WSS) models 2360/2361,
and 2350. (The 2380 does not directly connect to the AP.)
Note.
The AP radios are disabled by default and can be enabled only by the system
administrator using the WLAN Management softwareapplication or the WSS's
command-line interface (CLI).
Note.
The radio frequency band, operating channels, and transmit power depend on the
country of operation specified by the system administrator using WLAN Management
software or the WSS's CLI.
Table 6: AP Mechanical and Compliance Specifications
Specification
Size
Weight
Operating Temperature
Storage Temperature
Humidity
Power over Ethernet (PoE)
Status indicators
Table 7 on page
lists the MAC address allocation scheme.
Description
Diameter: 16.76 cm (6.6 inches)
Height: 4.69 cm (1.85 inches)
Without mounting bracket: 0.35 kg (12.5 ounces)
With mounting bracket: 0.40 kg (14 ounces)
0° C to +50° C (32° F to 122° F)
-20° C to +70° C (-4° F to +158° F)
10% to 95% noncondensing
41 VDC to 49 VDC (46 VDC nominal)
IEEE 802.3af
Health/WSS and radio LEDs
(For descriptions of the LEDs, see
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide
112, Table 8 on page 113, and
"Status LEDs" on page
111
Table 6 lists the
Table 9 on page 113 list the
31.)