Installing An Ap-2330/2330A/2330B; Installation Hardware And Tools - Nortel 2330 Installation Manual

38 Installing and connecting an AP-2330/2330A/2330B
Table 2: 10/100 Ethernet Straight-Through Pin Signals
WSS
Pin
1
2
3
4
5
6
7
8
Mounting an AP-2330 access point on a solid surface requires using a Cat-5e ferrite beaded cable that does not have
strain relief. For installation on all other surfaces, you can use the Cat-5e ferrite beaded cable with or without strain
relief.
(For more information about cables, see

Installing an AP-2330/2330A/2330B

To install an AP-2330/2330A/2330B, use one of the procedures in this section.

Installation hardware and tools

Table 3 lists the mounting hardware and tools required for each type of installation.
NN47250-302 (320661-E Version 02.01)
Other Device
Function Pin
RD+ 1
RD- 2
TD+ 3
PoE+ 4
PoE+ 5
TD- 6
PoE- 7
PoE- 8
"Cable ports" on page
Function
TD+
TD-
RD+
PoE+
PoE+
RD-
PoE-
PoE-
30.)