Nortel 2330 Installation Manual page 47

c
Rotate the universal mounting bracket clockwise until the flanges snap into place on the T-bar clamp
as shown in
Figure 19. Step 6—Top View
Universal mounting
bracket
T- bar
T-bar clamps
(attached
to T-bar)
Port connector
opening
(Viewed from above ceiling tiles, looking down.)
Figure 20. Step 6—Bottom View
Port connector
opening
7
Pull the Cat-5 cable (ferrite beaded for AP-2330) about 15 cm (about 6 inches) out of the hole in the
ceiling tile and through the port connector opening to create enough slack to insert the cable.
8
Insert the Cat-5 cable (ferrite beaded for AP-2330) into the connector.
9
Install the Kensington lock (optional).
a
Loop the Kensington lock's cable around an object that cannot be moved or damaged by a person
pulling on the cable.
b
Insert the key into the Kensington lock.
c
Insert the Kensington lock into the security slot on the AP.
d
Rotate the key right or left to secure the lock to the AP.
Installing and connecting an AP-2330/2330A/2330B 47
Figure 20 on page 47.
Universal mounting bracket
Nortel WLAN Access Point 2330/2330A/2330B Installation Guide
T-bar