Loop Detection Config - Panasonic PN25249 Operation Manual

3.2.17. Loop Detection Config

Select "Advanced Config" and "Loop Detection" and then "Loop Detection Config"
to open the screen shown in Figure 3-37. On this screen, you can configure addi-
tional settings.
Screen Description
Global Loop Detec-
tion Status
Loop Detect Status
Recovery Status
Recover Timer
Figure 3-37 Loop Detection Config
Displays the status of the Global Loop Detection function.
Enable Enables Global Loop Detection.
Disable Disables Global Loop Detection.
Enables/disables the loop detection function for ports.
Enables/disables recovery when a loop is detected in a port.
Enters the time until recovery when a loop is detected in a port.
The factory default setting is 60 seconds.
56