Fdb Table - Panasonic PN25249 Operation Manual

3.1.11. FDB Table

Select "Basic Config" and "FDB" and then "FDB Table" to open the screen shown in
Figure 3-11. This screen shows the MAC addresses learned in the FDB table by
port.
Screen Description
Aging Displays the time for which an FDB table is retained. It is equal to the time after
Time receiving the last packet. The factory default setting is 300 seconds (5 minutes).
Narrowing-down Narrows down records in the list by the specified VLAN ID.
VLAN ID
Narrowing-down Narrows down records in the list by the specified port.
Port number
Target Port num- Displays the selected port number.
ber
MAC Address Displays the MAC address in the FDB table.
Figure 3-11 FDB Table (by Port)
28