Panasonic PN25249 Operation Manual page 20

Screen Description
Port Number
Trunk
Type
Port Status
Link Status
Duplex Mode
Flow Control
Auto-MDI
Displays the port number.
Displays the group number for a trunked port.
Displays the port type.
100TX
1000T
Displays the current port status. For all ports, "Enable" is the factory default set-
ting.
Enable
Disable
Displays the current link status.
Up
Down
Displays the communication speed and full-duplex/half-duplex settings.
For all ports, "Auto" is the factory default setting.
Auto
100M/Full
100M/Half
10M/Full
10M/Half
Displays the flow control settings.
For all ports, "Disable" is the factory default setting.
Enable
Disable
Displays the Auto MDI/MDI-X function settings. Ports 1 to -20 are set to "Dis-
able," and Ports 21 to -24 are set to "Enable" at factory default setting.
Enable
Disable
The port type is 10/100BASE-TX.
The port type is 1000BASE-T.
The port is available.
The port is not available.
A link has been established successfully.
A link has not been established.
Auto negotiation mode
100 Mbps full-duplex
100 Mbps half-duplex
10 Mbps full-duplex
10 Mbps half-duplex
The flow control is enabled.
The flow control is disabled.
The Auto-MDI/MDI-X function is enabled.
The Auto-MDI/MDI-X function is disabled.
20