Power Saving Port Configration - Panasonic PN25249 Operation Manual

3.1.5.

Power Saving Port Configration

Select "Basic Config" and "Port Config" and then "Power Saving Port Config" to
open the screen shown in Figure 3-5. On this screen, you can configure the power
saving settings of ports.
Screen Description
Port Number Displays the port number.
Type Displays the port type.
100TX
1000T
Link Status Displays the current link status.
Up
Down
Power Saving Displays the power saving mode settings. For all ports, "Half" is the factory
Mode default setting.
Full
Half
Disable
Energy Efficient Displays the EEE (Energy Efficient Ethernet) status.
Ethernet For all ports, "Enabled" is the factory default setting.
Enabled
Disabled
Figure 3-5 Power Saving Port Configration
The port type is 10/100BASE-TX.
The port type is 1000BASE-T.
A link has been established successfully.
A link has not been established.
The MNO series power saving mode status is enabled (Full).
The MNO series power saving mode status is enabled
(Half).
The MNO series power saving mode status is disabled.
The EEE is enabled.
The EEE is disabled.
22