Panasonic PN25249 Operation Manual page 65

Screen Description
Entry Displays the event number.
Time Displays the time when the event occurred. The cumulative time since power-on is displayed
if 時刻設定 is not configured.
Event Displays the description of the event that occurred on this Switching Hub.
Login from console
Login from telnet,
xxx.xxx.xxx.xxx
Configuration changed
Runtime code changes
Configuration file upload
Configuration file download
Reboot: Normal
Reboot: Factory Default
Reboot: Factory Default
Except IP
SNTP first update to yyyy/
mm/dd hh:mm:ss
! Stus: xxxxxxxx IP: x Code:
x Add: xxxxxxxx
! Tsk: "xxxx" P:xxxxxxxxx
Pri: xx
Port- xx Link-up
xx
Port- Link-down
xx
Port- Power ON notifica-
tion
xx
Port- Power OFF notifica-
tion
System Cold Start
Note: Up to 1024 system logs are saved. If 1025 or more system logs are created,
the oldest system log will be deleted and overwritten with a new log.
There was login from the console port .
There was login from Telnet.
The configuration was changed.
The firmware was changed.
The configuration file was transferred to the TFTP server.
The configuration file was transferred from the TFTP server.
This Switching Hub rebooted.
This Switching Hub rebooted and reset the settings to fac-
tory default.
This Switching Hub rebooted and reset the settings except
the IP address to factory default.
This Switching Hub accessed SNTP server to retrieve time
information.
Displays the system information when an exception occurs.
The port link is up.
The port link is down.
The power supply to the target port is turned ON.
The power supply to the target port is turned OFF.
This Switching Hub powered on.
65