Port Monitoring Configration - Panasonic PN25249 Operation Manual

3.2.7.

Port Monitoring Configration

Select "Advanced Config" and "Port Monitoring Config" to open the screen shown
in Figure 3-23. On this screen, you can configure the port monitoring settings.
Screen Description
Monitor Output
Port
Monitor Target
Port
Monitor Direction
Monitor Status
Note: Mirror packets in transmission direction will include the VLAN tag of the
received VLAN ID.
Figure 3-23 Port Monitoring Configration
Displays the port number of a port at which packets from other ports can be
monitored.
Displays the port number of a port to be monitored.
Displays which of transmit and receive packets are monitored at the port to be
monitored.
"Send/Recv" is the factory default setting.
Send Monitors transmit packets.
Recv Monitors receive packets.
Send/Recv Monitors both transmit and receive packets.
Displays whether monitoring is enabled.
"Disable" is the factory default setting.
Enable Monitors packets.
Disable Does not monitor packets.
40