Makita HR3200C Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Chuck Section (Model HR3200, HR3210C)
ASSEMBLY
Take the reverse steps of the disassembling procedure.
Refer to Figs. 6 and 5.
[3] -1A. Chuck Section (Model HR3210FCT)
ASSEMBLY
Take the reverse steps of the disassembling procedure.
Refer to Figs. 11, 10, 9 and 7.
Note: Fit Compression spring 42 into the groove of Washer 28. (Fig. 12)
[3] -2. Tool Holder Section
DISASSEMBLY
1) Disassemble Chuck section as illustrated in Figs. 5 and 6. (Model HR3200C, HR3210C)
1A) Separate Tool holder assembly from the Machine as illustrated in Figs 5 and 7. (HR3210FCT)
2) Disassemble Tool holder section (HR3210FCT: Tool holder guide section) together with Cylinder section.
And Oil seal can be removed from Barrel complete as illustrated in Fig. 13.
Fig. 13
M4x16 Hex socket
head bolt: 1 pc.
Crank housing
cover
M6x25 Hex socket
head bolt: 4 pcs.
Disassemble Crank housing
cover and Barrel complete.
HR3200C
HR3210C
Barrel
complete
HR3210FCT
Oil seal
Barrel complete
From Barrel Complete, Oil seal can
be removed as illustrated above.
Fig. 12
Groove
Compression
spring 42
Barrel
complete
Disassemble Tool holder section together with
Cylinder section by striking Tool holder.
Barrel complete
Disassemble Tool holder guide section
together with Cylinder section by striking Tool
holder guide.
P 7 / 24
Washer 28
Tool holder
section
Cylinder
section
Tool holder
guide section
Cylinder
section