Makita HR3200C Technical Information page 19

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -7. Handle Section and Electrical Parts
DISASSEMBLY
1) Disassemble Handle section as illustrated in Fig. 25 and 26.
2) Controller and Power supply cord can be removed. (Fig. 26)
3) HR3200C: Disassemble Handle cover. ON-OFF Switch can be replaced as illustrated in Fig. 41.
3A) HR3210C or HR3210FCT: After removing ON-OFF Switch, Handle section can be disassembled as illustrated in
Fig. 41A.
Fig. 41
Unscrew 4x18 Tapping screw. And separate
Handle cover with Slotted screwdriver.
Handle
4x18 Tapping screw : 1 pc.
Fig. 41A
Unscrew 4x18 Tapping screw.
And separate Handle cover
with Slotted screwdriver.
Handle cover
4x18 Tapping
screw: 1 pc.
HR3200C
Handle
cover
HR3210C
Replace ON-OFF Switch etc.
Switch holder
complete
Switch lever
Lead unit
ON-OFF Switch
Replace ON-OFF Switch etc.
Switch lever
Handle
HR3210FCT
Handle Section can be disassembled
as illustrated below.
5x40 Tapping Screw: 2 pcs.
Handle base
5x25 Tapping
screw: 2 pcs.
Shoulder sleeve 6: 2 pcs.
P 19 / 24
Switch holder complete
ON-OFF Switch
Lead unit
Flat washer 5: 2 pcs.
Compression spring 11
Dust cover
Handle