Makita HR3200C Technical Information page 21

R
epair
[4] MAINTENANCE PROGRAM
Replacing the following parts at the same time is recommended when replacing Carbon brushes is required. See Fig. 44.
Note: Be sure to put Makita grease R No. 00 and N No. 2 to the specific portions. Refer to pages 2 and 3.
Fig. 44
No.
2 Tool Holder Cap
6 Steel ball 7: 2 pcs.
26 27 O ring 15 (for Impact bolt)
41 O ring 18 (for Striker)
10 Steel ball 6: 3 pcs.
HR3200C, HR3210C
Description
42 46
Tool holder
Chuck Section for
HR3200C, HR3210C
No. Description
3 Ring Spring 19
7 Guide washer
28 Fluoro carbon resin ring 20
O ring 18 (for Piston)
Chuck assembly for
HR3210FCT
Impact bolt
Tool holder
P 21 / 24
Striker Piston