Makita HR3200C Technical Information page 20

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -7. Handle Section and Electrical Parts
ASSEMBLY
Take the reverse of the disassembling steps.
Note: Dust cover support and Dust cover are directional. Refer to Fig. 42.
Fig. 42
5x40 Tapping
screw: 2 pcs.
Handle base
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Fastening Torque of Screw and Bolt
Fasten Bolts and Drill chuck to the specific fastening torque. Refer to Fig. 43.
Fig. 43
Item No.
18
400
Quick Change Drill Chuck
(Standard Equipment for HR3210FCT)
400
Upper side
Flat washer 5
Bow portion of
Dust cover
Lower side
Description
M6 x 25 Hex socket head bolt
Drill chuck
Chuck
holder
Triangle mark of Dust cover support
Face the triangle mark of Dust cover support
to the upper side and insert it to Dust cover.
Handle
Q'ty Fastening Torque
4 7.8 - 11.8 N.m
1 34.3 - 44.1 N.m
18
Barrel complete
P 20 /24
Face the bow portion of
Dust cover to the upper side
and assemble Dust cover to
Handle.
Crank Housing
Complete