Component/Video Gbr - Sony SRX-S110 Installation Manual

Component/Video GBR

With the analog component connectors provided on the
optional LKRI-001 board, the projector can be connected to
any video devices equipped with analog component
connectors such as an analog Betacam™, a DVD
recorder/player, or a high-definition video device equipped with
video GBR connectors.
Notes
When connecting to the output of component equipment, set "Signal Mode"
of "Input Source" in the PICTURE CONTROL window of the SRX Controller
software to "Y/Pb/Pr". When connecting to the video GBR output of a high-
definition video device, set it to "RGB."
26
DVI-D AUX
R/Pr/G/Y/B/Pb
connectors
Component cable.etc
(not supplied)
to component output
video GBR
VTR, DVD player, etc.
SRX-series 4K Projector - System Installation Guide