Connecting the Projector
When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose connections may
increase noise and reduce performance of picture
signals. When pulling out a cable, be sure to pull it out
from the plug, not the cable itself.
• When installing the optional input board, consult with
the Sony dealer.
Refer also to the instruction manuals of the equipment to
be connected.
Connecting with HD-SDI Equipment
Attach the optional LKRI-002 HD-SDI (4:2:2) input board
to the input board attachment part, and connect the
HDCAM recorder/player.
Left side
INTER LOCK ETHERNET
RS232C
HDCAM recorder/player, etc.
IN
OUT
IN
OUT
IN connector
HD-SDI connecting cable
(not supplyed)
to HD-SDI output
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
Connecting with Component/Video
GBR Equipment
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a DVD recorder/player or analog video equipment
equipped with the component output, or an high-definition
equipment equipped with a video GBR connector.
Left side
INTER LOCK ETHERNET
RS232C
Betacam, DVD recorder/player, etc.
Note
When connecting to the output of HD component
equipment, set "Signal Mode" of "Input Source" in the
PICTURE CONTROL window to "Y/Pb/Pr," and when
connecting to the output of HD video GBR equipment, set
to "RGB."
For details, see page 26.
R(P
/C
)
G(Y/Y)
B(P
/C
)
HD
VD
r
r
b
b
R(P
/C
)
G(Y/Y)
B(P
/C
)
HD
VD
r
r
b
b
IN
OUT
IN
OUT
R/P
/ G/Y / B/P
r
b
connectors
Component cable, etc
(not supplied)
to component output/
video GBR
Connecting the Projector
19
GB