Page 2
Voor de Klanten in Nederland WARNING • Gooi de batterij niet weg maar lever deze in als klein chemisch afval (KCA). To reduce the risk of fire or electric shock, • Dit apparaat bevat een vast ingebouwde batterij die niet vervangen hoeft te worden do not expose this apparatus to rain or tijdens de levensduur van het apparaat.
Table of Contents Chapter 1 Overview Precautions ..................5 Features.................... 6 Location and Function of Controls ..........7 Front/Top....................7 Left Side/Rear..................8 Control Function Menu Window ............8 Remote Commander................10 Chapter 2 Preparations Precautions on Installation............12 Unsuitable Installation................. 12 Unsuitable Conditions .................
Page 4
Chapter 3 Projecting Projecting the Picture ..............21 Using the Remote Commander ............21 Using the Computer for Controlling the Projector ......23 Chapter 4 Adjustments and Settings Using the SRX Controller Displaying the Control Function Menu Window ......25 PICTURE CONTROL Window ............
• Should any liquid or solid object fall into the cabinet, as color irregularity or a shorten lamp life. unplug the unit and have it checked by your Sony dealer • Do not install the unit in a location near heat sources before operating it further.
High resolution For maximum protection, repack your unit as it was Sony’s new, unique three SXRD™ (Silicon X-tal originally packed at the factory. Reflective Display) panels with about 8,850,000 pixels realizes a high-resolution of 4096 ×...
Use to keep the projector level if it is installed on an uneven surface. e Lens cover f Lens mount part When attaching the optional lens, consult your Sony dealer. g Carrying handle Use to carry the projector. There is another handle on the rear side.
Connect the AC power cord with three wires (not “Adjustments and Settings Using the SRX Controller” on supplied). page 25. For connection of the AC power cord, contact your Sony dealer. f STATUS MESSAGE window Displays an error message. If the message is displayed, contact your Sony dealer.
Page 9
c Information window Location: Shows the location where the projector is installed, as set in the SETTING window at the time of installation. Name: Shows the name of the projector that was set in the SETTING window at the time of installation. Operation Timer: Shows the operation hours of the projector.
f Window select buttons d MUTING ON/OFF buttons Open the window with the items you want to set or adjust. Clicking the ON button cuts off the whole picture on the screen momentarily. Click the OFF button to restore the g Adjustment/setting window picture.
Page 11
shuts off from lamp light completely using a shutter, and Example: When you want to project the signal input from displays the black signal on the whole screen. the INPUT B board on Screen 3 (lower left screen), press the INPUT SEL B button, then press the d FUNCTION 1/2/3 buttons SCREEN SEL 3 button.
Preparations Chapter activating the protection circuit. Be sure not to block the Precautions on ventilation holes for exhaust. Leave a space of more than 1 m (39 inches) around the unit. Installation Extremely hot and humid Unsuitable Installation Do not install the projector in the following situations. Such installations may cause a malfunction or damage to the projector.
Unsuitable Conditions Installation Do not use the projector under the following conditions. Using the Carrying Handles Laying the unit on its side or upside down Use the front and rear carrying handles to carry the Tilting the unit to the right or left projector.
Caution Installing the SRX Do not turn the spanner forcibly when the screw has fully Controller in a Computer rotated. Otherwise, the spanner may slip and injure your hand. for Controlling the Projector Installing the Projector This section describes briefly how to install the projector If you install the supplied SRX Controller in a computer, on the floor.
Page 15
After a while, the Welcome page of the SRX When you want to install it in the currently displayed Controller appears. folder, click “Next.” If you want to install it in a different folder, click “Change…,” specify the folder, click “OK,” then click “Next.”...
ETHERNET connector or the RS232C of time without the Ethernet cable connected, the message connector. “Sony SR Projector Initializing…” may appear in the STATUS MESSAGE window while you are setting up for networking after connecting the Ethernet cable. This is not Connecting the Computer via the a malfunction of the projector.
About the Browser Screen Starting the SRX Controller Starting the SRX Controller Double-click the icon for the SRX Controller in the desktop window of the computer. The SRX Controller starts and the Browser Screen is displayed. Note when starting the SRX Controller When the Operating System of the computer is Windows XP SP2 or later, or any commercially available firewall software is installed in your computer, the following may...
• When installing the optional input board, consult your Click “Quit” from the File menu on the menu bar. Sony dealer. Refer also to the instruction manuals of the equipment to Changing the Connection Mode be connected.
Connecting with a Computer Equipped With an Analog RGB Output Attach the optional LKRI-001 analog input board to the Left side input board attachment part on the projector, and connect with a computer. DVI-D INTER LOCK ETHERNET RS232C DVI-D connector AUX connector Left side DVI-D...
Left side Left side DVI-D DVI-D G(Y/Y) INTER LOCK ETHERNET RS232C INTER LOCK ETHERNET RS232C / G/Y / B/P IN connector connectors Component cable, etc HD-SDI connecting cable (not supplied) (not supplyed) to component output/ video GBR to HD-SDI output SRW-5000 HD DIGITAL VIDEO CASSETTE RECORDER Betacam, DVD recorder/player, etc.
Projecting Chapter Using the Remote Commander Projecting the Picture STATUS LAMP indicator Use the supplied Remote Commander or a computer in which the supplied SRX Controller is installed to project the picture on the screen. SCREEN MODE MUTING 1 2 4 MUTING FUNCTION INPUT SEL...
Page 22
Set the main power switch on the left side of the quad-screen mode. If you project still pictures only, projector to the upper position. you may project them on any screen. The STATUS LAMP indicator lights red and the Adjust the focus with the FOCUS +/– buttons. projector goes into standby mode.
Start your computer and double-click the icon of Using the Computer for Controlling the SRX Controller in the desktop window. the Projector The Browser Screen of the SRX Controller opens. Select the projector you want to operate by double- STATUS LAMP indicator clicking the projector or by pointing at it and clicking the Select button.
Page 24
To cut off the picture Note Click “ON” of the CUT OFF buttons. When you select the input from the connectors on When you select the dual-screen mode or quad-screen INPUT A on the projector, or on the LKRI-001, LKRI- mode, you can cut off the picture of each screen 003 or LKRI-004 input board, select the appropriate independently.
Adjustments and Settings Using the SRX Controller Chapter Click any of the PICTURE CONTROL, COLOR/ Displaying the Control FRAME and INSTALLATION buttons to display the desired control window. Function Menu Window For details on each setting window, see the relevant window pages.
Note PICTURE CONTROL When you click the FUNCTION button to switch to Window another FUNCTION setting, the picture will be cut off for up to about 10 seconds. The picture with the selected FUNCTION setting will then appear on the screen. The PICTURE CONTROL window is used to select the About the items that cannot be adjusted input source or to adjust the picture quality.
When the 10-bit signal based on Sony’s unique Signal Adjust specification is input, select “10bit Twin Full” or “10bit Single Full” for a signal of Full Range Adjusts the picture quality of the input signal. compliance, or “10bit Twin Limited” or “10bit Single...
“CUSTOM4.” “DCI W/P” is preset in CUSTOM1 to COLOR/FRAME Window 4 settings in the factory. “6500” is recommended for a normal high-definition signal or RGB signal. Set this item to “DCI W/P” to project a movie source. The COLOR/FRAME window is used to adjust the input Gamma: Selects a gamma correction curve from among signal.
V Shift: Adjusts the vertical position of the picture. As the INSTALLATION Window setting value increases, the picture moves up. As the value decreases, the picture moves down. Notes The INSTALLATION window is used to adjust the projected picture, change the lamp output, etc. •...
SQUEEZE Note When you click the radio button to switch to the other This function allows the input signal to be displayed on the setting, the picture will be cut off for up to about 10 screen in a converted aspect ratio. seconds, and the picture will then appear on the screen.
Input Signals And Adjustable/Setting Items Some items of “Signal Adjust” in the PICTURE CONTROL window and “Frame Adjust” in the COLOR/FRAME window are not adjusted or set depending on the input signals. Items that cannot be adjusted depending on the input signal are not displayed in the window.
Function Menu window become red when the time for replacement is coming near. The percentage indicates the time used before the recommended time for replacement. Use them as a guide. Be sure to ask your Sony dealer to replace a projection lamp and lamp house. Lamp Life...
Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following guide. If the problem still persists, consult your Sony dealer. Power Symptom Cause Remedy Power is not turned on. The main power is turned off.
SRX Controller. If there are two or more messages, a displayed message changes each 5 seconds. Use the list below to check the meaning of the error, and consult your Sony dealer. Be sure to inform them of the displayed messages and their numbers.
Page 35
Error messages Meaning REAR FAN ALERT Trouble with the huge fan at the rear, or the harness is disconnected or down. LOW REAL TIME CLOCK The RTC battery (BT201) for the SY-321 board should be replaced. BATTERY FPGA CONFIG FAILURE An internal line does not function properly.
When the LKRI-001 is installed Specifications Analog RGB/component: BNC type R/R-Y: 0.7 Vp-p ±2 dB positive, 75 ohms terminated G/G SYNC: 0.7 Vp-p ±2 dB positive, Optical characteristics 75 ohms terminated Projection system G with sync/Y: 1 Vp-p ±2 dB sync SXRD (Silicon X-tal Reflective Display) negative, 75 ohms terminated 3 panel prism color integration system...
Page 37
Performance guarantee temperature Always verify that the unit is operating properly before 10°C to 30°C (50°F to 86°F) use. SONY WILL NOT BE LIABLE FOR DAMAGES Operating humidity OF ANY KIND INCLUDING, BUT NOT LIMITED 35% to 85% (no condensation)