6-2. Placement
• Install the projector on the floor (Fig. 1) or mount it to the ceiling.
Any other installation may cause a malfunction such as color irregularity or a reduction in lamp life.
• Do not install the projector upside down. (Fig. 2)
• Do not install the projector at a tilt to the right or left. (Fig. 3, 4)
• It is possible to install the projector with an upwards or downwards tilt,
to a maximum angle of 45 degrees. (Fig. 5)
Figure 1
Figure 3
Figure 5
Figure 2
OK
Figure 4
NG
45°
45°
6
Installation Requirements
NG
NG
17