8-5. Supplied SRX Controller Software
The SRX-Series projectors come equipped with the SRX Controller software and its intuitive GUIs allow easy setup
and adjustments using a PC. The projectors can be controlled through either Ethernet or RS-232C interfaces, and
multiple projectors can be controlled from a single PC (when using the Ethernet connection).
A comprehensive range of setup parameters including input configurations, colorimetry controls, installation
adjustments and maintenance settings can be controlled via the software. These are briefly explained below. For
details of the software, please refer to the operation manual supplied with the projector.
Picture Control
• Input source selection
• Interlace or progressive
• Contrast
• Brightness
• Color
• Sharpness
Color/Frame
• Color space
• Color temperature
• Gamma
• Dot phase
• H size
• H shift
• V shift
Installation
• Zoom
• Focus
• Lens shift
• Electric V shift
• Lamp power
• Lamp mode: dual or single
• Front or rear projection
• Test pattern selection
The software also provides controls for initial setup and service items.
30
SRX-series 4K Projector - System Installation Guide