Telnet Control - CYP CPLUS-V4H2HP Operation Manual

6.4 Telnet Control

Before attempting to use telnet control, please ensure that both the
unit and the PC/Laptop are connected to the same active networks.
To access Telnet in Windows 7, click on the "Start" menu and type
"cmd" in the search field, then press "Enter".
Under Windows XP go to the "Start" menu, click on "Run", type "cmd"
then press "Enter".
Under Mac OS X, go to Go→Applications→Utilities→Terminal
See below for reference.
Once in the CLI (Command Line Interface) type "telnet" followed by
the IP address of the unit and "23", then hit "Enter".
12